Cognitive Radio : Overview (The best material to learn about Cognitive Radio)

If you are trying to know about Cognitive Radio and not getting any material or book or any class lecture related to Cognitive Radio then i can bet this is the best material you have ever had !In the below Invited Paper Simon Haykin has described the very basic things of Cognitive Radio which will make your concept clear.If you want to research on Cognitive Radio then the below material on cognitive radio will also provide you the scope to do so.

Cognitive Radio: Brain-Empowered
Wireless Communications
Simon Haykin, Life Fellow, IEEE

Abstract—Cognitive radio is viewed as a novel approach for improving
the utilization of a precious natural resource: the radio
electromagnetic spectrum.
The cognitive radio, built on a software-defined radio, is defined
as an intelligent wireless communication system that is
aware of its environment and uses the methodology of understanding-
by-building to learn from the environment and adapt
to statistical variations in the input stimuli, with two primary
objectives in mind:
• highly reliable communication whenever and wherever
needed;
• efficient utilization of the radio spectrum.
Following the discussion of interference temperature as a new
metric for the quantification and management of interference, the
paper addresses three fundamental cognitive tasks.
1) Radio-scene analysis.
2) Channel-state estimation and predictive modeling.
3) Transmit-power control and dynamic spectrum management.
This paper also discusses the emergent behavior of cognitive radio.
Index Terms—Awareness, channel-state estimation and predictive
modeling, cognition, competition and cooperation, emergent
behavior, interference temperature, machine learning, radio-scene
analysis, rate feedback, spectrum analysis, spectrum holes, spectrum
management, stochastic games, transmit-power control,
water filling.

I. INTRODUCTION
A. Background
THE electromagnetic radio spectrum is a natural resource,
the use of which by transmitters and receivers is licensed
by governments. In November 2002, the Federal Communications
Commission (FCC) published a report prepared by the
Spectrum-Policy Task Force, aimed at improving the way in
which this precious resource is managed in the United States [1].
The task force was made up of a team of high-level, multidisciplinary
professional FCC staff—economists, engineers, and
attorneys—from across the commission’s bureaus and offices.
Among the task force major findings and recommendations, the
second finding on page 3 of the report is rather revealing in the
context of spectrum utilization:
Manuscript received February 1, 2004; revised June 4, 2004.
The author is with Adaptive Systems Laboratory, McMaster University,
Hamilton, ON L8S 4K1, Canada (e-mail: haykin@mcmaster.ca).
Digital Object Identifier 10.1109/JSAC.2004.839380
“In many bands, spectrum access is a more significant
problem than physical scarcity of spectrum, in large
part due to legacy command-and-control regulation that
limits the ability of potential spectrum users to obtain such
access.”
Indeed, if we were to scan portions of the radio spectrum including
the revenue-rich urban areas, wewould find that [2]–[4]:
1) some frequency bands in the spectrum are largely unoccupied
most of the time;
2) some other frequency bands are only partially occupied;
3) the remaining frequency bands are heavily used.
The underutilization of the electromagnetic spectrum leads us
to think in terms of spectrum holes, for which we offer the following
definition [2]:
A spectrum hole is a band of frequencies assigned to a primary
user, but, at a particular time and specific geographic location,
the band is not being utilized by that user.
Spectrum utilization can be improved significantly by making
it possible for a secondary user (who is not being serviced) to
access a spectrum hole unoccupied by the primary user at the
right location and the time in question. Cognitive radio [5], [6],
inclusive of software-defined radio, has been proposed as the
means to promote the efficient use of the spectrum by exploiting
the existence of spectrum holes.
But, first and foremost, what do we mean by cognitive radio?
Before responding to this question, it is in order that we address
the meaning of the related term “cognition.” According to the
Encyclopedia of Computer Science [7], we have a three-point
computational view of cognition.
1) Mental states and processes intervene between input
stimuli and output responses.
2) The mental states and processes are described by
algorithms.
3) The mental states and processes lend themselves to scientific
investigations.
Moreover, we may infer from Pfeifer and Scheier [8] that the
interdisciplinary study of cognition is concerned with exploring
general principles of intelligence through a synthetic methodology
termed learning by understanding. Putting these ideas together
and bearing in mind that cognitive radio is aimed at improved
utilization of the radio spectrum, we offer the following
definition for cognitive radio.
Cognitive radio is an intelligent wireless communication
system that is aware of its surrounding environment (i.e., outside
0733-8716/$20.00 © 2005 IEEE
Authorized licensed use limited to: East West University. Downloaded on July 20,2010 at 03:31:01 UTC from IEEE Xplore. Restrictions apply.
202 IEEE JOURNAL ON SELECTED AREAS IN COMMUNICATIONS, VOL. 23, NO. 2, FEBRUARY 2005
world), and uses the methodology of understanding-by-building
to learn from the environment and adapt its internal states to
statistical variations in the incoming RF stimuli by making
corresponding changes in certain operating parameters (e.g.,
transmit-power, carrier-frequency, and modulation strategy) in
real-time, with two primary objectives in mind:
• highly reliable communications whenever and wherever
needed;
• efficient utilization of the radio spectrum.
Six key words stand out in this definition: awareness,1 intelligence,
learning, adaptivity, reliability, and efficiency.
Implementation of this far-reaching combination of capabilities
is indeed feasible today, thanks to the spectacular advances
in digital signal processing, networking, machine learning,
computer software, and computer hardware.
In addition to the cognitive capabilities just mentioned, a cognitive
radio is also endowed with reconfigurability.2 This latter
capability is provided by a platform known as software-defined
radio, upon which a cognitive radio is built. Software-defined
radio (SDR) is a practical reality today, thanks to the convergence
of two key technologies: digital radio, and computer software
[11]–[13].
B. Cognitive Tasks: An Overview
For reconfigurability, a cognitive radio looks naturally to software-
defined radio to perform this task. For other tasks of a
cognitive kind, the cognitive radio looks to signal-processing
and machine-learning procedures for their implementation. The
cognitive process starts with the passive sensing of RF stimuli
and culminates with action.
In this paper, we focus on three on-line cognitive tasks3:
1) Radio-scene analysis, which encompasses the following:
• estimation of interference temperature of the radio
environment;
• detection of spectrum holes.
2) Channel identification, which encompasses the following:
• estimation of channel-state information (CSI);
• prediction of channel capacity for use by the
transmitter
3) Transmit-power control and dynamic spectrum management.
Tasks 1) and 2) are carried out in the receiver, and task 3) is
carried out in the transmitter. Through interaction with the RF
1According to Fette [10], the awareness capability of cognitive radio embodies
awareness with respect to the transmitted waveform, RF spectrum,
communication network, geography, locally available services, user needs,
language, situation, and security policy.
2Reconfigurability provides the basis for the following features [13].
• Adaptation of the radio interface so as to accommodate variations in the
development of new interface standards.
• Incorporation of new applications and services as they emerge.
• Incorporation of updates in software technology.
• Exploitation of flexible heterogeneous services provided by radio networks.
3Cognition also includes language and communication [9]. The cognitive
radio’s language is a set of signs and symbols that permits different internal
constituents of the radio to communicate with each other. The cognitive task of
language understanding is discussed in Mitola’s Ph.D. dissertation [6]; for some
further notes, see Section XII-A.
Fig. 1. Basic cognitive cycle. (The figure focuses on three fundamental
cognitive tasks.)
environment, these three tasks form a cognitive cycle,4 which is
pictured in its most basic form in Fig. 1.
From this brief discussion, it is apparent that the cognitive
module in the transmitter must work in a harmonious manner
with the cognitive modules in the receiver. In order to maintain
this harmony between the cognitive radio’s transmitter and receiver
at all times, we need a feedback channel connecting the
receiver to the transmitter. Through the feedback channel, the
receiver is enabled to convey information on the performance
of the forward link to the transmitter. The cognitive radio is,
therefore, by necessity, an example of a feedback communication
system.
One other comment is in order. A broadly defined cognitive
radio technology accommodates a scale of differing degrees of
cognition. At one end of the scale, the user may simply pick a
spectrum hole and build its cognitive cycle around that hole.
At the other end of the scale, the user may employ multiple
implementation technologies to build its cognitive cycle around
a wideband spectrum hole or set of narrowband spectrum holes
to provide the best expected performance in terms of spectrum
management and transmit-power control, and do so in the most
highly secure manner possible.
C. Historical Notes
Unlike conventional radio, the history of which goes back to
the pioneering work of Guglielmo Marconi in December 1901,
the development of cognitive radio is still at a conceptual stage.
Nevertheless, as we look to the future, we see that cognitive
radio has the potential for making a significant difference to the
way in which the radio spectrum can be accessed with improved
utilization of the spectrum as a primary objective. Indeed, given
4The idea of a cognitive cycle for cognitive radio was first described by Mitola
in [5]; the picture depicted in that reference is more detailed than that of Fig. 1.
The cognitive cycle of Fig. 1 pertains to a one-way communication path, with
the transmitter and receiver located in two different places. In a two-way communication
scenario, we have a transceiver (i.e., combination of transmitter and
receiver) at each end of the communication path; all the cognitive functions embodied
in the cognitive cycle of Fig. 1 are built into each of the two transceivers.
Authorized licensed use limited to: East West University. Downloaded on July 20,2010 at 03:31:01 UTC from IEEE Xplore. Restrictions apply.
HAYKIN: COGNITIVE RADIO: BRAIN-EMPOWERED WIRELESS COMMUNICATIONS 203
its potential, cognitive radio can be justifiably described as a
“disruptive, but unobtrusive technology.”
The term “cognitive radio” was coined by Joseph Mitola.5 In
an article published in 1999, Mitola described how a cognitive
radio could enhance the flexibility of personal wireless services
through a new language called the radio knowledge representation
language (RKRL) [5]. The idea of RKRL was expanded
further in Mitola’s own doctoral dissertation, which was presented
at the Royal Institute of Technology, Sweden, in May
2000 [6]. This dissertation presents a conceptual overview of
cognitive radio as an exciting multidisciplinary subject.
As noted earlier, the FCC published a report in 2002, which
was aimed at the changes in technology and the profound impact
that those changes would have on spectrum policy [1]. That report
set the stage for a workshop on cognitive radio, which was
held inWashington, DC, May 2003. The papers and reports that
were presented at that Workshop are available at the Web site
listed under [14]. This Workshop was followed by a Conference
on Cognitive Radios, which was held in Las Vegas, NV, in
March 2004 [15].
D. Purpose of this Paper
In a short section entitled “Research Issues” at the end of his
Doctoral Dissertation, Mitola goes on to say the following [6]:
“‘How do cognitive radios learn best? merits attention.’
The exploration of learning in cognitive radio includes the
internal tuning of parameters and the external structuring
of the environment to enhance machine learning. Since
many aspects of wireless networks are artificial, they may
be adjusted to enhance machine learning. This dissertation
did not attempt to answer these questions, but it frames
them for future research.”
The primary purpose of this paper is to build on Mitola’s visionary
dissertation by presenting detailed expositions of signalprocessing
and adaptive procedures that lie at the heart of cognitive
radio.
E. Organization of this Paper
The remaining sections of the paper are organized as follows.
• Sections II–V address the task of radio-scene analysis,
with Section II introducing the notion of interference temperature
as a new metric for the quantification and management
of interference in a radio environment. Section III
reviews nonparametric spectrum analysis with emphasis
on the multitaper method for spectral estimation, followed
by Section IV on application of the multitaper method
to noise-floor estimation. Section V discusses the related
issue of spectrum-hole detection.
• Section VI discusses channel-state estimation and predictive
modeling.
• Sections VII–X are devoted to multiuser cognitive
radio networks, with Sections VII and VIII reviewing
stochastic games and highlighting the processes of cooperation
and competition that characterize multiuser
networks. Section IX discusses an iterative water-filling
(WF) procedure for distributed transmit-power control.
5It is noteworthy that the term “software-defined radio” was also coined by
Mitola.
Section X discusses the issues that arise in dynamic
spectrum management, which is performed hand-in-hand
with transmit-power control.
• Section XI discusses the related issue of emergent behavior
that could arise in a cognitive radio environment.
• Section XII concludes the paper and highlights the research
issues that merit attention in the future development
of cognitive radio.
II. INTERFERENCE TEMPERATURE
Currently, the radio environment is transmitter-centric, in the
sense that the transmitted power is designed to approach a prescribed
noise floor at a certain distance from the transmitter.
However, it is possible for the RF noise floor to rise due to
the unpredictable appearance of new sources of interference,
thereby causing a progressive degradation of the signal coverage.
To guard against such a possibility, the FCC Spectrum
Policy Task Force [1] has recommended a paradigm shift in interference
assessment, that is, a shift away from largely fixed operations
in the transmitter and toward real-time interactions between
the transmitter and receiver in an adaptive manner. The
recommendation is based on a new metric called the interference
temperature,6 which is intended to quantify and manage
the sources of interference in a radio environment. Moreover,
the specification of an interference-temperature limit provides
a “worst case” characterization of the RF environment in a particular
frequency band and at a particular geographic location,
where the receiver could be expected to operate satisfactorily.
The recommendation is made with two key benefits in mind.7
1) The interference temperature at a receiving antenna provides
an accurate measure for the acceptable level of RF
interference in the frequency band of interest; any transmission
in that band is considered to be “harmful” if it
would increase the noise floor above the interference-temperature
limit.
2) Given a particular frequency band in which the interference
temperature is not exceeded, that band could be made
available to unserviced users; the interference-temperature
limit would then serve as a “cap” placed on potential
RF energy that could be introduced into that band.
For obvious reasons, regulatory agencies would be responsible
for setting the interference-temperature limit, bearing in mind
the condition of the RF environment that exists in the frequency
band under consideration.
What about the unit for interference temperature? Following
the well-known definition of equivalent noise temperature of a
receiver [20], we may state that the interference temperature is
measured in degrees Kelvin. Moreover, the interference-temperature
limit multiplied by Boltzmann’s constant
6We may also introduce the concept of interference temperature density,
which is defined as the interference temperature per capture area of the
receiving antenna [16]. The interference temperature density could be made
independent of the receiving antenna characteristics through the use of a
reference antenna.
In a historical context, the notion of radio noise temperature is discussed in the
literature in the context of microwave background, and also used in the study of
solar radio bursts [17], [18].
7Inference temperature has aroused controversy. In [19], the National Association
for Amateur Radio presents a critique of this metric.
Authorized licensed use limited to: East West University. Downloaded on July 20,2010 at 03:31:01 UTC from IEEE Xplore. Restrictions apply.
204 IEEE JOURNAL ON SELECTED AREAS IN COMMUNICATIONS, VOL. 23, NO. 2, FEBRUARY 2005
10 joules per degree Kelvin yields the corresponding
upper limit on permissible power spectral density
in a frequency band of interest, and that density is measured in
joules per second or, equivalently, watts per hertz.
III. RADIO-SCENE ANALYSIS: SPACE–TIME PROCESSING
CONSIDERATIONS
The stimuli generated by radio emitters are nonstationary
spatio–temporal signals in that their statistics depend on both
time and space. Correspondingly, the passive task of radio-scene
analysis involves space–time processing, which encompasses
the following operations.
1) Two adaptive, spectrally related functions, namely, estimation
of the interference temperature, and detection
of spectrum holes, both of which are performed at the
receiving end of the system. (Information obtained on
these two functions, sent to the transmitter via a feedback
channel, is needed by the transmitter to carry out
the joint function of active transmit-power control and dynamic
spectrum management.)
2) Adaptive beamforming for interference control, which is
performed at both the transmitting and receiving ends of
the system in a complementary fashion.
A. Time-Frequency Distribution
Unfortunately, the statistical analysis of nonstationary signals,
exemplified by RF stimuli, has had a rather mixed history.
Although the general second-order theory of nonstationary signals
was published during the 1940s by Loève [21], [22], it has
not been applied nearly as extensively as the theory of stationary
processes published only slightly previously and independently
by Wiener and Kolmogorov.
To account for the nonstationary behavior of a signal, we have
to include time (implicitly or explicitly) in a statistical description
of the signal. Given the desirability of working in the frequency
domain for well-established reasons, we may include
the effect of time by adopting a time-frequency distribution of
the signal. During the last 25 years, many papers have been published
on various estimates of time-frequency distributions; see,
for example, [23] and the references cited therein. In most of
this work, however, the signal is assumed to be deterministic.
In addition, many of the proposed estimators of time-frequency
distributions are constrained to match time and frequency marginal
density conditions. However, the frequency marginal distribution
is, except for a scaling factor, just the periodogram
of the signal. At least since the early work of Rayleigh [24],
it has been known that the periodogram is a badly biased and
inconsistent estimator of the power spectrum.We, therefore, do
not consider matching marginal distributions to be important.
Rather, we advocate a stochastic approach to time-frequency
distributions which is rooted in the works of Loève [21], [22]
and Thomson [25], [26].
For the stochastic approach, we may proceed in one of two
ways.
1) The incoming RF stimuli are sectioned into a continuous
sequence of successive bursts, with each burst being short
enough to justify pseudostationarity and yet long enough
to produce an accurate spectral estimate.
2) Time and frequency are considered jointly under the
Loève transform.
Approach 1) is well suited for wireless communications. In any
event, we need a nonparametric method for spectral estimation
that is both accurate and principled. For reasons that will become
apparent in what follows, multitaper spectral estimation
is considered to be the method of choice.
B. Multitaper Spectral Estimation
In the spectral estimation literature, it is well known that
the estimation problem is made difficult by the bias-variance
dilemma, which encompasses the interplay between two points.
• Bias of the power-spectrum estimate of a time series, due
to the sidelobe leakage phenomenon, is reduced by tapering
(i.e., windowing) the time series.
• The cost incurred by this improvement is an increase in
variance of the estimate, which is due to the loss of information
resulting from a reduction in the effective sample
size.
Howcan we resolve this dilemma by mitigating the loss of information
due to tapering? The answer to this fundamental question
lies in the principled use of multiple orthonormal tapers
(windows),8 an idea that was first applied to spectral estimation
by Thomson [26]. The idea is embodied in the multitaper spectral
estimation procedure.9 Specifically, the procedure linearly
expands the part of the time series in a fixed bandwidth
to (centered on some frequency ) in a special family of
sequences known as the Slepian sequences.10 The remarkable
property of Slepian sequences is that their Fourier transforms
have the maximal energy concentration in the bandwidth
to under a finite sample-size constraint. This property,
in turn, allows us to trade spectral resolution for improved spectral
characteristics, namely, reduced variance of the spectral estimate
without compromising the bias of the estimate.
Given a time series , the multitaper spectral estimation
procedure determines two things.
1) An orthonormal sequence of Slepian tapers denoted by
.
8Another method for addressing the bias-variance dilemma involves dividing
the time series into a set of possible overlapping segments, computing a periodogram
for each tapered (windowed) segment, and then averaging the resulting
set of power spectral estimates, which is what is done in Welch’s method
[27]. However, unlike the principled use of multiple orthogonal tapers,Welch’s
method is rather ad hoc in its formulation.
9In the original paper by Thomson [36], the multitaper spectral estimation
procedure is referred to as the method of multiple windows. For detailed descriptions
of this procedure, see [26], [28] and the book by Percival andWalden
[29, Ch. 7].
The Signal Processing Toolbox [30] includes theMATLAB code for Thomson’s
multitaper method and other nonparametric, as well as parametric methods of
spectral estimation.
10The Slepian sequences are also known as discrete prolate spheroidal sequences.
For detailed treatment of these sequences, see the original paper by
Slepian [31], the appendix to Thomson’s paper [26], and the book by Percival
and Walden [29, Ch. 8].
Authorized licensed use limited to: East West University. Downloaded on July 20,2010 at 03:31:01 UTC from IEEE Xplore. Restrictions apply.
HAYKIN: COGNITIVE RADIO: BRAIN-EMPOWERED WIRELESS COMMUNICATIONS 205
2) The associated eigenspectra defined by the Fourier
transforms
(1)
The energy distributions of the eigenspectra are concentrated
inside a resolution bandwidth, denoted by . The time-bandwidth
product
(2)
defines the degrees of freedom available for controlling the variance
of the spectral estimator. The choice of parameters and
provides a tradeoff between spectral resolution and variance.11
A natural spectral estimate, based on the first few eigenspectra
that exhibit the least sidelobe leakage, is given by
(3)
where is the eigenvalue associated with the th eigenspectrum.
Two points are noteworthy.
1) The denominator in (3) makes the estimate
unbiased.
2) Provided that we choose , then the eigenvalue
is close to unity, in which case
Moreover, the spectral estimate can be improved by the
use of “adaptive weighting,” which is designed to minimize the
presence of broadband leakage in the spectrum [26], [28].
It is important to note that in [33], Stoica and Sundin show
that the multitaper spectral estimation procedure can be interpreted
as an “approximation” of the maximum-likelihood power
spectrum estimator. Moreover, they show that for wideband
signals, the multitaper spectral estimation procedure is “nearly
optimal” in the sense that it almost achieves the Cramér–Rao
bound for a nonparametric spectral estimator. Most important,
unlike the maximum-likelihood spectral estimator, the multitaper
spectral estimator is computationally feasible.
C. Adaptive Beamforming for Interference Control
Spectral estimation accounts for the temporal characteristic
of RF stimuli. To account for the spatial characteristic of RF
stimuli, we resort to the use of adaptive beamforming.12 The
motivation for so doing is interference control at the cognitive
radio receiver, which is achieved in two stages.
11For an estimate of the variance of a multitaper spectral estimator, we may
use a resampling technique called Jackknifing [32]. The technique bypasses
the need for finding an exact analytic expression for the probability distribution
of the spectral estimator, which is impractical because time-series data
(e.g., stimuli produced by the radio environment) are typically nonstationary,
non-Gaussian, and frequently contain outliers. Moreover, it may be argued that
the multitaper spectral estimation procedure results in nearly uncorrelated coefficients,
which provides further justification for the use of jackknifing.
12Adaptive beamformers, also referred to as adaptive antennas or smart antennas,
are discussed in the books [34]–[37].
In the first stage of interference control, the transmitter exploits
geographic awareness to focus its radiation pattern along
the direction of the receiver. Two beneficial effects result from
beamforming in the transmitter.
1) At the transmitter, power is preserved by avoiding radiation
of the transmitted signal in all directions.
2) Assuming that every cognitive radio transmitter follows a
strategy similar to that summarized under point 1), interference
at the receiver due to the actions of other transmitters
is minimized.
At the receiver, beamforming is performed for the adaptive
cancellation of residual interference from known transmitters,
as well as interference produced by other unknown transmitters.
For this purpose, we may use a robustified version of the
generalized sidelobe canceller [38], [39], which is designed to
protect the target RF signal and place nulls along the directions
of interferers.
IV. INTERFERENCE-TEMPERATURE ESTIMATION
With cognitive radio being receiver-centric, it is necessary
that the receiver be provided with a reliable spectral estimate of
the interference temperature. We may satisfy this requirement
by doing two things.
1) Use the multitaper method to estimate the power spectrum
of the interference temperature due to the cumulative distribution
of both internal sources of noise and external
sources of RF energy. In light of the findings reported in
[33], this estimate is near-optimal.
2) Use a large number of sensors to properly “sniff” the RF
environment, wherever it is feasible. The large number of
sensors is needed to account for the spatial variation of the
RF stimuli from one location to another.
The issue of multiple-sensor permissibility is raised under
point 2) because of the diverse ways in which wireless communications
could be deployed. For example, in an indoor building
environment and communication between one building and
another, it is feasible to use multiple sensors (i.e., antennas)
placed at strategic locations in order to improve the reliability
of interference-temperature estimation. On the other hand, in
the case of an ordinary mobile unit with limited real estate, the
interference-temperature estimation may have to be confined to
a single sensor. In what follows, we describe the multiple-sensor
scenario, recognizing that it includes the single-sensor scenario
as a special case.
Let denote the total number of sensors deployed in the RF
environment. Let denote the th eigenspectrum computed
by the th sensor. We may then construct the -byspatio–
temporal complex-valued matrix
...
...
(4)
where each column is produced using stimuli sensed at a different
gridpoint, each row is computed using a different Slepian
Authorized licensed use limited to: East West University. Downloaded on July 20,2010 at 03:31:01 UTC from IEEE Xplore. Restrictions apply.
206 IEEE JOURNAL ON SELECTED AREAS IN COMMUNICATIONS, VOL. 23, NO. 2, FEBRUARY 2005
taper, and the represent variable weights accounting
for relative areas of gridpoints, as described in [40].
Each entry in the matrix is produced by two contributions,
one due to additive internal noise in the sensor and the
other due to the incoming RF stimuli. Insofar as radio-scene
analysis is concerned, however, the primary contribution of interest
is that due to RF stimuli. An effective tool for denoising
is the singular value decomposition (SVD), the application of
which to the matrix yields the decomposition [41]
(5)
where is the th singular value of matrix ,
is the associated left singular vector, and is the associated
right singular vector; the superscript denotes Hermitian
transposition. In analogy with principal components analysis,
the decomposition of (5) may be viewed as one of principal
modulations produced by the external RF stimuli. According to
(5), the singular value scales the th principal modulation
of matrix .
Forming the -by- matrix product , we find
that the entries on the main diagonal of this product, except for
a scaling factor, represent the eigenspectrum due to each of the
Slepian tapers, spatially averaged over the sensors. Let the
singular values of matrix be ordered
. The th eigenvalue of is
. We may then make the following statements.
1) The largest eigenvalue, namely, , provides an
estimate of the interference temperature, except for a constant.
This estimate may be improved by using a linear
combination of the largest two or three eigenvalues:
, ,1,2.
2) The left singular vectors, namely, the , give the spatial
distribution of the interferers.
3) The right singular vectors, namely, the , give the
multitaper coefficients for the interferers’ waveform.
To summarize, multitaper spectral estimation combined with
singular value decomposition provides an effective procedure
for estimating the power spectrum of the noise floor in an RF
environment. A cautionary note, however, is in order: the procedure
is computationally intensive but nevertheless manageable.
In particular, the computation of eigenspectra followed by singular
value decomposition would have to be repeated at each
frequency of interest.
V. DETECTION OF SPECTRUM HOLES
In passively sensing the radio scene and thereby estimating
the power spectra of incoming RF stimuli, we have a basis for
classifying the spectra into three broadly defined types, as summarized
here.
1) Black spaces, which are occupied by high-power “local”
interferers some of the time.
2) Grey spaces, which are partially occupied by low-power
interferers.
3) White spaces, which are free of RF interferers except for
ambient noise, made up of natural and artificial forms of
noise, namely:
• broadband thermal noise produced by external physical
phenomena such as solar radiation;
• transient reflections from lightening, plasma (fluorescent)
lights, and aircraft;
• impulsive noise produced by ignitions, commutators,
and microwave appliances;
• thermal noise due to internal spontaneous fluctuations
of electrons at the front end of individual
receivers.
White spaces (for sure) and grey spaces (to a lesser extent) are
obvious candidates for use by unserviced operators. Of course,
black spaces are to be avoided whenever and wherever the RF
emitters residing in them are switched ON. However, when at a
particular geographic location those emitters are switched OFF
and the black spaces assume the new role of “spectrum holes,”
cognitive radio provides the opportunity for creating significant
“white spaces” by invoking its dynamic-coordination capability
for spectrum sharing, on which more is said in Section X.
A. Detection Statistics
From these notes, it is apparent that a reliable strategy for
the detection of spectrum holes is of paramount importance to
the design and practical implementation of cognitive radio systems.
Moreover, in light of the material presented in Section IV,
the multitaper method combined with singular-value decomposition,
hereafter referred to as the MTM-SVD method,13 provides
the method of choice for solving this detection problem
by virtue of its accuracy and near-optimality.
By repeated application of the MTM-SVD method to the RF
stimuli at a particular geographic location and from one burst
of operation to the next, a time-frequency distribution of that
location is computed. The dimension of time is quantized into
discrete intervals separated by the burst duration. The dimension
of frequency is also quantized into discrete intervals separated
by resolution bandwidth of the multitaper spectral estimation
procedure.
Let denote the number of largest eigenvalues considered to
play important roles in estimating the interference temperature,
with denoting the th largest eigenvalue produced by
the burst of RF stimuli received at time . Let denote the
number of frequency resolutions of width , which occupy
the black space or gray space under scrutiny. Then, setting the
discrete frequency
where denotes the lowest end of a black/grey space, we
may define the decision statistic for detecting the transition from
such a space into a white space (i.e., spectrum hole) as
(6)
13Mann and Park [40] discuss the application of the MTM-SVD method to the
detection of oscillatory spatial-temporal signals in climate studies. They show
that this new methodology avoids the weaknesses of traditional signal-detection
techniques. In particular, the methodology permits a faithful reconstruction of
spatio–temporal patterns of narrowband signals in the presence of additive spatially
correlated noise.
Authorized licensed use limited to: East West University. Downloaded on July 20,2010 at 03:31:01 UTC from IEEE Xplore. Restrictions apply.
HAYKIN: COGNITIVE RADIO: BRAIN-EMPOWERED WIRELESS COMMUNICATIONS 207
Spectrum-hole detection is declared if two conditions are
satisfied.
1) The reduction in from one burst to the next exceeds
a prescribed threshold on several successive bursts.
2) Once the transition is completed, assumes minor
fluctuations typical of ambient noise.
For a more refined approach, we may use an adaptive filter
for change detection [42], [43]. Except for a scaling factor, the
decision statistic provides an estimate of the interference
temperature as it evolves with time discretized in accordance
with the burst duration. The adaptive filter is designed to produce
a model for the time evolution of when the RF emitter
responsible for the black space is switched ON. Assuming that
the filter is provided with a sufficient number of adjustable parameters
and the adaptive process makes it possible for the filter
to produce a good fit to the evolution of with time , the sequence
of residuals produced by the model would ideally be the
sample function of a white noise process. Of course, this state of
affairs would hold only when the emitter in question is switched
ON. Once the emitter is switched OFF, thereby setting the stage
for the creation of a spectrum hole, the whiteness property of the
model output disappears, which, in turn, provides the basis for
detecting the transition from a black space into a spectrum hole.
Whichever approach is used, the change-detection procedure
would clearly have to be location-specific. For example, if the
detection is performed in the basement of a building, the change
in from a black space to a white space is expected to be
significantly smaller than in an open environment. In any event,
the detection procedure would have to be sensitive enough to
work satisfactorily, regardless of location.
B. Practical Issues Affecting the Detection of Spectrum Holes
The effort involved in the detection of spectrum holes and
their subsequent exploitation in the management of radio spectrum
should not be underestimated. In practical terms, the task
of spectrum management (discussed in Section X) must not only
be impervious to the modulation formats of primary users, but
also several other issues.14
1) Environmental factors: Radio propagation across a wireless
channel is known to be affected by the following
factors.
• Path loss, which refers to the diminution of received
signal power with distance between the transmitter
and the receiver.
• Shadowing, which causes the received signal power
to fluctuate about the path loss by a multiplication
factor, thereby resulting in “coverage” holes.
2) Exclusive zones: An exclusion zone refers to the area (i.e.,
circle with some radius centered on the location of a primary
user) inside which the spectrum is free of use and
can, therefore, be made available to an unserviced operator.
This issue requires special attention in two possible
scenarios.
• The primary user happens to operate outside the exclusion
zone, in which case the identification of a
14The issues summarized herein follow a white paper submitted by Motorola
to the FCC [44].
spectrum hole must not be sensitive to radio interference
produced by the primary user.
• Wireless scenarios built around cooperative relay
(ad hoc) networks [45], [46], which are designed to
operate at very low transmit powers. The dynamic
spectrum management algorithm must be able to
cope with such weak scenarios.
3) Predictive capability for future use: The identification of
a spectrum hole at a particular geographic location and a
particular time will only hold for that particular time and
not necessarily for future time. Accordingly, the dynamic
spectrum management algorithm in the transmitter must
include two provisions.
• Continuous monitoring of the spectrum hole in
question.
• Alternative spectral route for dealing with the eventuality
of the primary user needing the spectrum for
its own use.
VI. CHANNEL-STATE ESTIMATION AND PREDICTIVEMODELING
As with every communication link, computation of the
channel capacity of a cognitive radio link requires knowledge
of channel-state information (CSI). This computation, in turn,
requires the use of a procedure for estimating the state of the
channel.
To deal with the channel-state estimation problem, traditionally,
we have proceeded in one of two ways [47].
• Differential detection, which lends itself to implementation
in a straightforward fashion to the use of -ary phase
modulation.
• Pilot transmission, which involves the periodic transmission
of a pilot (training sequence) known to the receiver.
The use of differential detection offers robustness and simplicity
of implementation, but at the expense of a significant degradation
in the frame-error rate (FER) versus signal-to-noise ratio
(SNR) performance of the receiver. On the other hand, pilot
transmission offers improved receiver performance, but the use
of a pilot is wasteful in both transmit power and channel bandwidth,
the very thing we should strive to avoid. What then do
we do, if the receiver requires knowledge of CSI for efficient
receiver performance? The answer to this fundamental question
lies in the use of semi-blind training of the receiver [48],
which distinguishes itself from the differential detection and
pilot transmission procedures in that the receiver has two modes
of operations.
1) Supervised training mode: During this mode, the receiver
acquires an estimate of the channel estimate, which is performed
under the supervision of a short training sequence
(consisting of two to four symbols) known to the receiver;
the short training sequence is sent over the channel for a
limited duration by the transmitter prior to the actual data
transmission session.
2) Tracking mode: Once a reliable estimate of the channel
state has been achieved, the training sequence is switched
off, actual data transmission is initiated, and the receiver
is switched to the tracking mode; this mode of operation
Authorized licensed use limited to: East West University. Downloaded on July 20,2010 at 03:31:01 UTC from IEEE Xplore. Restrictions apply.
208 IEEE JOURNAL ON SELECTED AREAS IN COMMUNICATIONS, VOL. 23, NO. 2, FEBRUARY 2005
is performed in an unsupervised manner on a continuous
basis during the course of data transmission.
A. Channel Tracking
The evolution of CSI with time is governed by a state-space
model comprised of two equations [48].
1) Process equation:
The state of a wireless link is defined as the minimal
set of data on the past behavior of the link that is needed
to predict the future behavior of the link. For the sake of
generality, we consider a multiple-input–multiple-output
(MIMO) wireless link15 of a narrowband category. Let
denote the channel coefficient from the th transmit
antenna to the th receive antenna at time , with
and . We may then describe
the scalar form of the state equation as
(7)
where the are time-varying autoregressive (AR) coefficients
and is the corresponding dynamic noise, both
at time . The AR coefficients account for the memory of
the channel due to the multipath phenomenon. The upper
limit of summation in (7) namely, , is the model order.
(The symbol used here should not be confused with the
symbol used to denote the time-bandwidth product in
Section III.)
2) Measurement equation:
The measurement equation for the MIMO wireless
link, also in scalar form, is described by
(8)
where is the encoded symbol transmitted by the th
antenna at time , and is the corresponding measurement
noise at the input of th receive antenna at time .
The is the signal observed at the output of the th antenna
at time .
15The use of a MIMO link offers several important advantages [47].
• Spatial degree of freedom, defined by N = minfN ;N g, where N
and N denote the numbers of transmit and receive antennas, respectively
[49].
• Increased spectral efficiency, which is asymptotically defined by [49]
lim
C(N)
N
= constant
where C(N) is the ergodic capacity of the link, expressed as a function of
N = N = N. This asymptotic property provides the basis for a spectacular
increase in spectral efficiency by increasing the number of transmit
and receive antennas.
• Diversity, which is asymptotically defined by [50]
lim
log FER()
log
= ��d
where d is the diversity order, and FER() is the frame-error rate expressed
as a function of the SNR .
These benefits (gained at the expense of increased complexity) commend the
use of MIMO links for cognitive radio, all the more so considering the fact that
the primary motivation for cognitive radio is the attainment of improved spectral
efficiency. Simply put, a MIMO wireless link is not a necessary ingredient for
cognitive radio but a highly desirable one.
The state-space model comprised of (7) and (8) is linear. The
property of linearity is justified in light of the fact that the propagation
of electromagnetic waves across a wireless link is governed
by Maxwell’s equations that are inherently linear.
What can we say about the AR coefficients, the dynamic
noise, and measurement noise, which collectively characterize
the state-space model of (7) and (8)? The answers to these questions
determine the choice of an appropriate tracking strategy. In
particular, the discussion of this issue addressed in [48] is summarized
here.
1) AR model: A Markovian model of order on offers
sufficient accuracy to model a Rayleigh-distributed
time-varying channel.
2) Noise processes: The dynamic noise in the process equation
and the measurement noise in the measurement equation
can both assume non-Gaussian forms.
The finding reported under point 1) directly affects the design
of the predictive model, which is an essential component of the
channel tracker. The findings reported under point 2) prompt
the search for a tracker outside of the classical Kalman filters,
whose theory is rooted in Gaussian statistics.
A tracker that can operate in a non-Gaussian environment is
the particle filter, whose theory is rooted in Bayesian estimation
and Monte Carlo simulation [51], [52]. Each particle in the filter
may be viewed as a Kalman filter merely in the sense that its
operation encompasses two updates:
• state update;
• measurement update;
which bootstrap on each other, thereby forming a closed feedback
loop. The particles are associated with weights, evolving
from one iteration to the next. In particular, whenever the few
particles whose weights assume negligible values, they are
dropped from the computation. Thereafter, the filter concentrates
on particles with large weights. In particular, on the next
iteration of the filter, each of those particles is split into new
particles whose multiplicity is determined in accordance with
the weights of the parent particles. From this brief description,
it is apparent that the computational complexity of a particle
filter is in excess of that of a Kalman filter, but the particle
filter makes up for it by being readily amenable to parallel
computation.
In [48], the superior performance of the particle filter over
the classical Kalman filter and other trackers (in the context of
wireless channels) is demonstrated for real-life data. In light of
the detailed studies reported in [48], we may conclude that the
semi-blind estimation procedure, embodying the combined use
of supervised training and channel tracking, offers an effective
and efficient method for the extraction of channel-state estimation
for use in a cognitive radio system.
The predictive AR model used in [48] is considered to be
time-invariant (i.e., static) in that the model parameters are determined
off-line (i.e., prior to transmission) and remain fixed
throughout the tracking process. However, recognizing that a
wireless channel is in actual fact nonstationary, with the degree
of nonstationarity being highly dependent on the environ-
Authorized licensed use limited to: East West University. Downloaded on July 20,2010 at 03:31:01 UTC from IEEE Xplore. Restrictions apply.
HAYKIN: COGNITIVE RADIO: BRAIN-EMPOWERED WIRELESS COMMUNICATIONS 209
ment, we intuitively would expect that an improvement in performance
of the channel tracker is achievable if somehow the
predictive model is made time-varying (i.e., dynamic). This expectation
has been demonstrated experimentally in [53] using
MIMO wireless data. Specifically, the dynamic channel tracker
accommodates a time-varying wireless channel by modeling the
channel parameters themselves as random walks, thereby allowing
them to assume a time-varying form.
Naturally, the maintenance of tracking a wireless channel in
a reliable manner is affected by conditions of the channel. To
be specific, we have found experimentally that when in the case
of a MIMO wireless communication system the determinant of
the channel matrix goes near zero, the particle filter experiences
difficulty in tracking the channel. The reason for this phenomenon
is that when the channel cannot support the information
rate being used, the receiver makes too many symbol errors consecutively.
This undesirable situation, in turn, causes the particle
filter and, therefore, the receiver to loose track. Monitoring of
the determinant of the channel matrix may, therefore, provide
the means to prevent the loss of channel tracking.
B. Rate Feedback
Channel-state estimation is needed by the receiver for coherent
detection of the transmitted signal. Channel-state estimation
is also needed for calculation of the channel capacity
required by the transmitter for transmit-power control, which is
to be discussed in Section IX. To satisfy this latter requirement,
the receiver first uses Shannon’s information capacity theorem
to calculate the instantaneous channel capacity , but rather
then send directly, the practical approach is to quantize
and feed the quantized transmission rate back to the transmitter,
hence, the term rate feedback. A selection of quantized transmission
rates is kept in a predetermined list, in which case the
receiver picks the closest entry in the list that is less than the
calculated value of [54]; it is that particular entry in the list
that forms the rate feedback.
In wireless communications, we typically find that there are
significant fluctuations in the transmission rate. A transmissionrate
fluctuation is considered to be significant if it is a predetermined
fixed percentage of the mean rate for the channel. In any
event, the transmitter would like to know the transmission-rate
fluctuations. In particular, if the transmission rate is greater than
the channel capacity, then there would be an outage. Correspondingly,
the outage capacity is defined as the maximum bit
rate that can be maintained across the wireless link for a prescribed
probability of outage.
There are two other points to keep in mind.
1) Rate-feedback delay: There is always some finite
time-delay in transmitting the quantized rate across
the feedback channel. During the rate-feedback delay,
the channel capacity would inevitably vary, raising the
potential possibility for an outage by picking too high a
transmission rate. To mitigate this problem, prediction
of the outage capacity becomes a necessary requirement,
hence, the need for building a predictive model into the
design of rate-feedback system in the receiver [55].
2) Higher order Markov model: Typically, a first-order
Markov model is used to calculate the outage capacity
of a MIMO wireless system. By definition, a first-order
Markov model relies on information gained from the
state immediately proceeding the current state; in other
words, information pertaining to other previous states
is considered to be of negligible importance. This assumption,
usually made for mathematical tractability,
is justified for a slow-fading wireless link. However,
in the more difficult case of a fast-fading wireless link,
the channel fluctuates more rapidly, which means that a
higher order (e.g., second-order) Markov model is likely
to provide more useful information about the current
state than a first-order Markov model. Moreover, as the
diversity order is increased, the channel becomes hardened
quickly, in that variance of the channel capacity,
relative to its mean, decreases rapidly [54]. For this same
reason, we expect the fractional information gain about
the current state due to the use of a higher order model to
increase with decreasing diversity order [55].
VII. COOPERATION AND COMPETITION IN MULTIUSER
COGNITIVE RADIO ENVIRONMENTS
In this section, we set the stage for the next important task:
transmit-power control.
In conventional wireless communications built around base
stations, transmit-power levels are controlled by the base stations
so as to provide the required coverage area and thereby
provide the desired receiver performance. On the other hand, it
may be necessary for a cognitive radio to operate in a decentralized
manner, thereby broadening the scope of its applications. In
such a case, some alternative means must be found to exercise
control over the transmit power. The key question is: how can
transmit-power control be achieved at the transmitter?
A partial answer to this fundamental question lies in building
cooperative mechanisms into the way in which multiple access
by users to the cognitive radio channel is accomplished. The
cooperative mechanisms may include the following.
1) Etiquette and protocol. Such provisions may be likened
to the use of traffic lights, stop signs, and speed limits,
which are intended for motorists (using a highly dense
transportation system of roads and highways) for their individual
safety and benefits.
2) Cooperative ad hoc networks. In such networks, the
users communicate with each other without any fixed
infrastructure. In [45], Shepard studies a large packet
radio network using spread-spectrum modulation. The
only required form of coordination in the network is
that of pairwise between neighboring nodes (users) that
are in direct communication. To mitigate interference,
it is proposed that each node create a transmit-receive
schedule. The schedule is communicated to a nearest
neighbor only when a source node’s schedule and that of
the neighboring node permit the source node to transmit
it and the neighboring node to receive it. Under some
reasonable assumptions, simulations are presented to
show that with this completely decentralized control, the
network can scale to almost arbitrary numbers of nodes.
In an independent and like-minded study [46], Gupta
and Kumar considered a radio network consisting of
identical nodes that communicate with each other. The
Authorized licensed use limited to: East West University. Downloaded on July 20,2010 at 03:31:01 UTC from IEEE Xplore. Restrictions apply.
210 IEEE JOURNAL ON SELECTED AREAS IN COMMUNICATIONS, VOL. 23, NO. 2, FEBRUARY 2005
nodes are arbitrarily located inside a disk of unit area. A
data packet produced by a source node is transmitted to a
sink node (i.e., destination) via a series of hops across intermediate
nodes in the network. Let one bit-meter denote
one bit of information transmitted across a distance of one
meter toward its destination. Then, the transport capacity
of the network is defined as the total number of bit-meters
that the network can transport in one second for all
nodes. Under a protocol model of noninterference, Gupta
and Kumar derive two significant results. First, the transport
capacity of the network increases with . Second,
for a node communicating with another node at a distance
nonvanishingly far away, the throughput (in bits per
second) decreases with increasing . These results are
consistent with those of Shephard. However, Gupta and
Kumar do not consider the congestion problem identified
in Shepard’s work.
Through the cooperative mechanisms described under 1) and 2)
and other cooperative means, the users of cognitive radio may
be able to benefit from cooperation with each other in that the
system could end up being able to support more users because
of the potential for an improved spectrum-management strategy.
The cooperative ad hoc networks studied by Shepard [45]
and Gupta and Kumar [46] are examples of a new generation
of wireless networks, which, in a loose sense, resemble the Internet.
In any event, in cognitive radio environments built around
ad hoc networks and existing infrastructured networks, it is possible
to find the multiuser communication process being complicated
by another phenomenon, namely, competition, which
works in opposition to cooperation.
Basically, the driving force behind competition in a multiuser
environment lies in having to operate under the umbrella of limitations
imposed on available network resources. Given such an
environment, a particular user may try to exploit the cognitive
radio channel for self-enrichment in one form or another, which,
in turn, may prompt other users to do likewise. However, exploitation
via competition should not be confused with the selforientation
of cognitive radio which involves the assignment of
priority to certain stimuli (e.g., urgent requirements or needs).
In any event, the control of transmit power in a multiuser cognitive
radio environment would have to operate under two stringent
limitations on network resources: the interference-temperature
limit imposed by regulatory agencies, and the availability
of a limited number of spectrum holes depending on usage.
What we are describing here is a multiuser communicationtheoretic
problem. Unfortunately, a complete understanding of
multiuser communication theory is yet to be developed. Nevertheless,
we know enough about two diverse disciplines, namely,
information theory and game theory, for us to tackle this difficult
problem in a meaningful way. However, before proceeding
further, we digress briefly to introduce some basic concepts in
game theory.
VIII. STOCHASTIC GAMES
The transmit-power control problems in a cognitive-radio
environment (involving multiple users) may be viewed as a
game-theoretic problem.16 In the absence of competition, we
would then have an entirely cooperative game, in which case
the problem simplifies to an optimal control-theoretic problem.
This simplification is achieved by finding a single cost function
that is optimized by all the players, thereby eliminating the
game-theoretic aspects of the problem [58]. So, the issue of
interest is how to deal with a noncooperative game involving
multiple players. To formulate a mathematical framework
for such an environment, we have to account for three basic
realities:
• a state space that is the product of the individual players’
states;
• state transitions that are functions of joint actions taken by
the players;
• payoffs to individual players that depend on joint actions
as well.
That framework is found in stochastic games [57], which, also
occasionally appear under the name “Markov games” in the
computer science literature.
A stochastic game is described by the five-tuple
, where
• is a set of players, indexed ;
• is a set of possible states;
• is the joint-action space defined by the product set
, where is the set of actions available to
the th player;
• is a probabilistic transition function, an element of
which for joint action satisfies the condition
• , where is the payoff for the th
player and which is a function of the joint actions of all
players.
One other notational issue: the action of player is denoted
by , while the joint actions of the other players in the
set are denoted by . We use a similar notation for some
other variables.
Stochastic games are supersets of two kinds of decision processes,
namely, Markov decision process and matrix games, as
illustrated in Fig. 2. A Markov decision process is a special case
of a stochastic game with a single player, that is, . On the
other hand, a matrix game is a special case of a stochastic game
with a single state, that is, .
A. Nash Equilibria and Mixed Strategies
With two or more players17 being an integral part of a game,
it is natural for the study of cognitive radio to be motivated by
certain ideas in game theory. Prominent among those ideas for
finite games (i.e., stochastic games for which each player has
only a finite number of alternative courses of action) is that of a
Nash equilibrium, so named for the Nobel Laureate John Nash.
16In a historical context, the formulation of game theory may be traced back to
the pioneeringwork of John von Neumann in the 1930s, which culminated in the
publication of the coauthored book entitled “Theory of Games and Economic
Behavior” [56]. For modern treatments of game theory, see the books under [57]
and [58].
17Players are referred to as agents in the machine learning literature.
Authorized licensed use limited to: East West University. Downloaded on July 20,2010 at 03:31:01 UTC from IEEE Xplore. Restrictions apply.
HAYKIN: COGNITIVE RADIO: BRAIN-EMPOWERED WIRELESS COMMUNICATIONS 211
Fig. 2. Highlighting the differences between Markov decision processes,
matrix games, and stochastic games.
A Nash equilibrium is defined as an action profile (i.e., vector
of players’ actions) in which each action is a best response to
the actions of all the other players [59]. According to this definition,
a Nash equilibrium is a stable operating (i.e., equilibrium)
point in the sense that there is no incentive for any player
involved in a finite game to change strategy given that all the
other players continue to follow the equilibrium policy. The important
point to note here is that the Nash-equilibrium approach
provides a powerful tool for modeling nonstationary processes.
Simply put, it has had an enormous influence on the evolution of
game theory by shifting its emphasis toward the study of equilibria
as a predictive concept.
With the learning process modeled as a repeated stochastic
game (i.e., repeated version of a one-shot game), each player
gets to know the past behavior of the other players, which may
influence the current decision to be made. In such a game, the
task of a player is to select the best mixed strategy, given information
on the mixed strategies of all other players in the game;
hereafter, other players are referred to as “opponents.” A mixed
strategy is defined as a continuous randomization by a player
of its own actions, in which the actions (i.e., pure strategies) are
selected in a deterministic manner. Stated in another way, the
mixed strategy of a player is a random variable whose values
are the pure strategies of that player.
To explain what we mean by a mixed strategy, let denote
the th action of player with . The
mixed strategy of player , denoted by the set of probabilities
, is an integral part of the linear combination
(9)
Equivalently, we may express as the inner product
(10)
where
is the mixed strategy vector, and
is the deterministic action vector. The superscript denotes matrix
transposition. For all , the elements of the mixed strategy
vector satisfy the following two conditions:
1)
(11)
2)
(12)
Note also that the mixed strategies for the different players
are statistically independent.
The motivation for permitting the use of mixed strategies is
the well-known fact that every stochastic game has at least one
Nash equilibrium in the space of mixed strategies but not necessarily
in the space of pure strategies, hence, the preferred use of
mixed strategies over pure strategies. The purpose of a learning
algorithm is that of computing a mixed strategy, namely a sequence
over time .
It is also noteworthy that the implication of (9) through (12) is
that the entire set of mixed strategies lies inside a convex simplex
or convex hull, whose dimension is and whose vertices
are the . Such a geometric configuration makes the selection
of the best mixed strategy in a multiple-player environment a
more difficult proposition to tackle than the selection of the best
base action in a single-player environment.
B. Limitations of Nash Equilibrium
The formulation of Nash equilibrium assumes that the players
are rational, which means that each player has a “view of the
world.” According to Aumann and Brandenburger [60], mutual
knowledge of rationality and common knowledge of beliefs is
sufficient for deductive justification of the Nash equilibrium. Belief
refers to state of the world, expressed as a set of probability
distributions over tests; by “tests” we mean a sequence of actions
and observations that are executed at a specific time.
Despite the insightful value of the Aumann–Brandenburger
exposition, the notion of the Nash equilibrium has two practical
limitations.
1) The approach advocates the use of a best-response
strategy (i.e., a strategy whose outcome against an opponent
with a similar goal is the best possible one), but
in a two-player game for example, if one player adopts
a nonequilibrium strategy, then the optimal response of
the other player is of a nonequilibrium kind too. In such
situations, the Nash-equilibrium approach is no longer
applicable.
2) Description of a noncooperative game is essentially confined
to an equilibrium condition; unfortunately, the approach
does not teach us about the underlying dynamics
involved in establishing that equilibrium.
To refine the Nash equilibrium theory, we may embed learning
models in the formulation of game-theoretic algorithms. This
new approach provides a foundation for equilibrium theory, in
which less than fully rational players strive for some form of
optimality over time [57], [61].
C. Game-Theoretic Learning: No-Regret Algorithms
Statistical learning theory is a well-developed discipline for
dealing with uncertainty, which makes it well-suited for solving
game-theoretic problems. In this context, a class of no-regret
Authorized licensed use limited to: East West University. Downloaded on July 20,2010 at 03:31:01 UTC from IEEE Xplore. Restrictions apply.
212 IEEE JOURNAL ON SELECTED AREAS IN COMMUNICATIONS, VOL. 23, NO. 2, FEBRUARY 2005
algorithms is attracting a great deal of attention in the machinelearning
literature.
The provision of “no-regret” is motivated by the desire to
ensure two practical end-results.
1) A player does not get unlucky in an arbitrary nonstationary
environment. Even if the environment is not adversarial,
the player could experience bad performance when
using an algorithm that assumes independent and identically
distributed (i.i.d.) examples; the no-regret provision
guarantees that such a situation does not arise.
2) Clever opponents of that player do not exploit dynamic
changes or limited resources for their own selfish benefits.
The notion of regret can be defined in different ways.18 One
particular definition of no regret is basically a rephrasing of
boosting, the original formualation of which is due to Freund
and Schapire [62]. Basically, boosting refers to the training of
a committee machine in which several experts are trained on
data sets with entirely different distributions [62], [71]. It is a
general method that can be used to improve the performance of
any learning model. Stated in another way, boosting provides a
method for modifying the underlying distribution of examples
in such a way that a strong learning model is built around a set
of weak learning modules.
To see how boosting can also be viewed as a no-regret proposition,
consider a prediction problem with denoting
the sequence of input vectors. Let denote the one-step
prediction at time computed by the boosting algorithm operating
on this sequence. The prediction error is defined by the
difference . Let denote a convex cost function
of the prediction error ; the mean-square error is an example
of such a cost function. After processing examples, the resulting
cost function of the boosting algorithm is given by
(13)
If, however, the prediction was to be performed by one of
the experts using some fixed hypothesis to yield the prediction
error , the corresponding cost function would have the
value
(14)
The regret for not having used hypothesis is the difference
(15)
We say that the regret is negative if the difference is negative.
Let denote the class of all hypotheses used in the algorithm.
Then the overall regret for not having used the best
hypothesis is given by the supremum
(16)
18In a unified treatment of game-theoretic learning algorithms, Greenwald
[61] identifies three regret variations:
• External regret
• Internal regret
• Swap regret
External regret coincides with the notion of boosting as defined by Freund and
Schapire [62].
A boosting algorithm is synonymous with no-regret algorithms
because the overall regret is small no matter which particular
sequence of input vectors is presented to the algorithm.
Unfortunately, most no-regret algorithms are designed on the
premise that the hypotheses are chosen from a small, discrete
set, which, in turn, limits applicability of the algorithms. To
overcome this limitation, Gordon [63] expands on the Freund-
Schapire boosting (Hedge) algorithm by considering a class of
prediction problems with internal structure. Specifically, the internal
structure presumes two things.
1) The input vectors are assumed to lie on or inside an almost
arbitrary convex set, so long as it is possible to perform
convex optimization; for example, we could have a
-dimensional polyhedron or -dimensional sphere, were
is dimensionality of the input space.
2) The prediction rules (i.e., experts) are purposely designed
to be linear.
An example scenario that has the internal structure embodied
under points 1) and 2) is that of planning in a stochastic game
described by a Markov decision process, in which state-action
costs are controlled by an adversarial or clever opponent after
the player in question fixes its own policy. The reader is referred
to [64] for such an example involving a robot path-planning
problem, which may be likened to a cognitive radio problem
made difficult by the actions of a clever opponent.
Given such a framework, we can always make a legal prediction
in an efficient manner via convex duality, which is an
inherent property of convex optimization [65]. In particular, it
is always possible to choose a legal hypothesis that prevents the
total regret from growing too quickly (and, therefore, causes the
average regret to approach zero).
By exploiting this internal structure, Gordon derives a new
learning rule referred to as the Lagrangian hedging algorithm
[63]. This new algorithm is of a gradient descent kind, which
includes two steps, namely, projection and scaling. The projection
step simply ensures that we always make a legal prediction.
The scaling step adaptively adjusts the degree to which the algorithm
operates in an aggressive or conservative manner. In
particular, if the algorithm predicts poorly, then the cost function
assumes a large value on the average, which, in turn, tends
to make the predictions change slowly.
The algorithms derives its name from a combination of two
points.
1) The algorithm depends on one free parameter, namely, a
convex hedging function.
2) The hypothesis of interest can be viewed as a Lagrange
multiplier that keeps the regret from growing too fast.
To expand on the Lagrangian issue under point 2), consider the
case of a matrix game using a regret-matching algorithm. Regret-
matching, embodied in the generalized Blackwell condition
[61], means that the probability distribution over actions
by a player is proportional to the positive elements in the regret
vector of that player. For example, in the so-called “rock-scissors-
paper” game in which rock smashes scissors, scissors cut
paper, and paper wraps the rock, if we currently have a vector
made up as follows:
• regret 2 versus rock;
• regret versus scissors;
• regret 1 versus paper;
Authorized licensed use limited to: East West University. Downloaded on July 20,2010 at 03:31:01 UTC from IEEE Xplore. Restrictions apply.
HAYKIN: COGNITIVE RADIO: BRAIN-EMPOWERED WIRELESS COMMUNICATIONS 213
then we would play rock 2/3 of the time, never play scissors,
and play paper 1/3 of the time. The prediction at each step of
the regret-matching algorithm is a probability distribution over
actions. Ideally, we desire the no-regret property, which means
that the average regret vector approaches the region where all
of its elements are less than or equal to zero. However, at any
finite time, in practice, the regret vector may still have positive
elements. (The magnitudes of these elements are bounded
by theorems presented in [63].) In such a situation, we cannot
achieve the no-regret condition exactly in finite time. Rather, we
apply a soft constraint by imposing a quadratic penalty function
on each positive element of the regret vector. The penalty function
involves the sum of two components, one being the hedging
function and the other being an indicator function for the set of
unnormalized hypotheses using a gradient vector. The gradient
vector is itself defined as the derivative of the penalty function
with respect to the regret vector, the evaluation being made at the
current regret vector. It turns out that the gradient vector is just
the regret vector with all negative elements set equal to zero. The
desired hypothesis is gotten by normalizing this vector to form
a probability distribution of actions, which yields exactly the
regret-matching algorithm. In choosing the distribution of actions
in the manner described herein, we enforce the constraint
that the regret vector is not allowed to move upwards along the
gradient. Gordon’s gradient descent theorem, proved by induction
in [63], shows that the quadratic penalty function cannot
grow too quickly, which in turn, means that our average gradient
vector will get closer to the negative orthant, as desired.
In short, the Lagrangian hedging algorithm is a no-regret
algorithm designed to handle internal structure in the set of
allowable predictions. By exploiting this internal structure,
tight bounds on performance and fast rates of convergence
are achieved when the provision of no regret is of utmost
importance.
IX. DISTRIBUTED TRANSMIT-POWER CONTROL: ITERATIVE
WATER-FILLING
As an alternative to game-theoretic learning exemplified by a
no-regret algorithm, we may look to another approach, namely,
water-filling (WF) rooted in information theory [66]. To be specific,
consider a cognitive radio environment involving transmitters
and receivers. The environmental model is based on
two assumptions.
1) Communication across a channel is asynchronous, in
which case the communication process can be viewed as
a noncooperative game. For example, in a mesh network
consisting of a mixture of ad hoc networks and existing
infrastructured networks, the communication process
from a base station to users is controlled in a synchronous
manner, but the multihop communication process across
the ad hoc network could be asynchronous and, therefore,
noncooperative.
2) A signal-to-noise ratio (SNR) gap is included in calculating
the transmission rate so as to account for the gap
between the performance of a practical coding-modulation
scheme and the theoretical value of channel capacity.
(In effect, the SNR gap is large enough to assure reliable
communication under operating conditions all the time.)
In mathematical terms, the essence of transmit-power control
for such a noncooperative multiuser radio environment is stated
as follows.
Given a limited number of spectrum holes, select the transmitpower
levels of unserviced users so as to jointly maximize
their data-transmission rates, subject to the constraint that the
interference-temperature limit is not violated.
It may be tempting to suggest that the solution of this problem
lies in simply increasing the transmit-power level of each unserviced
transmitter. However, increasing the transmit-power
level of any one transmitter has the undesirable effect of also
increasing the level of interference to which the receivers of all
the other transmitters are subjected. The conclusion to be drawn
from this reality is that it is not possible to represent the overall
system performance with a single index of performance. (This
conclusion further confirms what we said previously in Section
VIII.) Rather, we have to adopt a tradeoff among the data
rates of all unserviced users in some computationally tractable
fashion.
Ideally, we would like to find a global solution to the constrained
maximization of the joint set of data-transmission rates
under study. Unfortunately, finding this global solution requires
an exhaustive search through the space of all possible power
allocations, in which case we find that the computational complexity
needed for attaining the global solution assumes a prohibitively
high level.
To overcome this computational difficulty, we use a new optimization
criterion called competitive optimality19 for solving the
transmit-power control problem, which may now be restated as
follows.
Considering a multiuser cognitive radio environment viewed
as a noncooperative game, maximize the performance of each
unserviced transceiver, regardless of what all the other transceivers
do, but subject to the constraint that the interferencetemperature
limit not be violated.
This formulation of the distributed transmit-power control
problem leads to a solution that is of a local nature; though suboptimum,
the solution is insightful, as described next.
A. Two-User Scenario: Simultaneous WF is Equivalent to
Nash Equilibrium
Consider the simple scenario of Fig. 3 involving two
users communicating across a flat-fading channel. The complex-
valued baseband channel matrix is denoted by
(17)
Viewing this scenario as a noncooperative game, we may describe
the two players of the game as follows:
19The competitive optimality criterion is discussed in Yu’s doctoral dissertation
[67, Ch. 4]. In particular, Yu develops an iterative WF algorithm for a suboptimum
solution to the multiuser digital subscriber line (DSL) environment,
viewed as a noncooperative game.
Authorized licensed use limited to: East West University. Downloaded on July 20,2010 at 03:31:01 UTC from IEEE Xplore. Restrictions apply.
214 IEEE JOURNAL ON SELECTED AREAS IN COMMUNICATIONS, VOL. 23, NO. 2, FEBRUARY 2005
Fig. 3. Signal-flow graph of a two-user communication scenario.
• The two players20 are represented by transmitters 1 and 2.
• The pure strategies (i.e., deterministic actions) of the two
players are defined by the power spectral densities
and that, respectively, pertain to the transmitted signals
radiated by the antennas of transmitters 1 and 2.
• The payoffs to the two players are defined by the datatransmission
rates and , which are, respectively,
produced by transmitters 1 and 2.
From the discussions presented in Section IV, we recognize
that the noise floor of the RF radio environment is characterized
by a frequency-dependent parameter: the power spectral density
. In effect, defines the “noise floor” above which
the transmit-power controller must fit the transmission-data requirements
of users 1 and 2.
Define the cross-coupling between the two users in terms of
two new real-valued parameters and by writing
(18)
and
(19)
where is the SNR gap. Assuming that the receivers do not perform
any form of interference-cancellation irrespective of the
received signal strengths, we may, respectively, formulate the
achievable data-transmission rates and as the two definite
integrals
(20)
and
(21)
The term in the first denominator and the term
in the second denominator are due to the cross-coupling
between the transmitters and receivers. The remaining
two terms and are noise terms defined by
(22)
20In the two-user example of Fig. 3, each user is represented by a singleinput–
single-output (SISO) wireless system—hence, the adoption of transmitters
1 and 2 of the two systems as the two players in a game-theoretic interpretation
of the example. In a MIMO generalization of this example, each user
has multiple transmitters. Nevertheless, there are still two players, with the two
players being represented by the two sets of multiple transmitters.
and
(23)
where and are, respectively, the particular
parts of the noise-floor’s spectral density that define the
spectral contents of spectrum holes 1 and 2.We are now ready to
formally state the competitive optimization problem as follows.
Given that the power spectra density of transmitter 2
is fixed, maximize the transmission-data of (20), subject to
the constraint
where is the prescribed interference-temperature limit and
is Boltzmann’s constant. A similar statement applies to the
competitive optimization of transmitter 2.
Of course, it is understood that both and remain
nonnegative for all . The solution to the optimization problem
described herein follows the allocation of transmit power in accordance
with the WF procedure [66], [67].
Fig. 4 presents the results of an experiment21 on the two-user
wireless scenario, which were obtained using theWFprocedure.
To add meaning to the important result portrayed in Fig. 4, we
may state that the optimal competitive response to the all purestrategy
corresponds to a Nash equilibrium. Stated in another
way, a Nash equilibrium is reached if, and only if, both users
simultaneously satisfy the WF condition [67].
An assumption implicit in theWF solution presented in Fig. 4
is that each transmitter of cognitive radio has knowledge of its
position with respect to the receivers in its operating range at all
times. In other words, cognitive radio has geographic awareness,
which is implemented by embedding a global positioning
21Specifications of the experiment presented in Fig. 4 are as follows.
Narrowband channels (uniformly spaced in frequency) available to the two
users:
• user 1: channels 1, 2, and 3;
• user 2: channels 4, 5, and 6.
Modulation Strategy: orthogonal frequency-division multiplexing (OFDM)
Multiuser path-loss matrix
0:5207 0 0 0:0035 0:0020 0:0024
0 0:5223 0 0:0030 0:0034 0:0031
0 0 0:5364 0:0040 0:0015 0:0035
0:0036 0:0002 0:0023 0:7136 0 0
0:0028 0:0029 0:0011 0 0:6945 0
0:0022 0:0010 0:0034 0 0 0:7312
:
Target data transmission rates:
• user 1: 9 bits/symbol;
• user 2: 12 bits/symbol;
Power constraint (imposed by interference-temperature limit) = 0 dB:
Receiver noise-power level = ��30 dB.
Ambient interference power level = ��24 dB.
The solution presented in Fig. 4 is achieved in two iterations of the WF algorithm.
Authorized licensed use limited to: East West University. Downloaded on July 20,2010 at 03:31:01 UTC from IEEE Xplore. Restrictions apply.
HAYKIN: COGNITIVE RADIO: BRAIN-EMPOWERED WIRELESS COMMUNICATIONS 215
Fig. 4. Two-user profile, illustrating two things. 1) The spectrum-sharing
process performed using the iterative WF algorithm. 2) The bit-loading curve
shown “bold-faced” at the top of the figure.
satellite (GPS) receiver in the system design [68]. The transmitter
puts its geographic awareness to good use by calculating
the path loss incurred in the course of electromagnetic propagation
of the transmitted signal to each receiver in the transmitter’s
operating range, which, in turn, makes it possible to calculate
the multiuser path-loss matrix of the environment.22
B. Multiuser Scenario: Iterative WF Algorithm
Emboldened by the WF solution illustrated in Fig. 4 for a
two-user scenario, we may formulate an iterative two-loop WF
algorithm for the distributed transmit-power control of a multiuser
radio environment. The environment involves a set of
transmitters indexed by and a corresponding set
of receivers indexed by . Viewing the multiuser
radio environment as a non cooperative game and assuming the
availability of an adequate number of spectrum holes to accommodate
the target data-transmission rates, the algorithm proceeds
as follows [67].
1) Initialization: Unless some prior knowledge is available,
the power distribution across the users is set equal to
zero.
22Let d denote the distance from a transmitter to a receiver. Extensive measurements
of the electromagnetic field strength, expressed as a function of the
distance d, carried out in various radio environments have motivated an empirical
propagation formula for the path loss, which expresses the received signal
power P in terms of the transmitted signal power P as follows [47]:
P =


d
P
where the path-loss exponent m varies from 2 to 5, depending on the environment,
and the attenuation parameter
 is frequency-dependent.
Considering the general case of n transmitters indexed by i, and n receivers
indexed by j, let h denote the complex-valued channel coefficient from transmitter
i to receiver j. Then, in light of the empirical propagation formula, we
may write
jh j =
P
P
=


d
; i= 1; 2; . . . ; n j = 1; 2; . . . ; n
where d is the distance from transmitter i to receiver j. Hence, knowing
,
m, and d for all i and j, we may calculate the multiuser path-loss matrix.
2) Inner loop (iteration): Given a set of allowed channels
(i.e., spectrum-holes):
• User 1 performs WF, subject to its power constraint.
At first, the user employs one channel; but if its target
rate is not satisfied, it will try to employ two channels,
and so on. The WF by user 1 is performed with only
the noise floor to account for.
• Then, user 2 performs the WF process, subject to its
own power constraint. At this point, in addition to the
noise floor, the WF computation accounts for interference
produced by user 1.
• The power-constrained WF process is continued until
all users are dealt with.
3) Outer loop (iteration): After the inner iteration is completed,
the power allocation among the users is adjusted:
• If the actual data-transmission rate of any user is found
to be greater than its target value, the transmit power
of that user is reduced.
• If, on the other hand, the actual data-transmission rate
of any user is less than the target value, the transmit
power is increased, keeping in mind that the interference
temperature limit is not violated.
4) Confirmation step: After the power adjustments, up or
down, are completed, the transmission-data rates of all the
users are checked:
• If the target rates of all the users are satisfied, the
computation is terminated.
• Otherwise, the algorithm goes back to the inner loop,
and the computations are repeated. This time, however,
the WF performed by every user, including user
1, must account for the interference produced by all the
other users.
In effect, the outer loop of the distributed transmit-power controller
tries to find the minimum level of transmit power needed
to satisfy the target data-transmission rates of all users.
For the distributed transmit-power controller to function
properly, two requirements must be satisfied.
• Each user knows, a priori, its own target rate.
• All the target rates lie within a permissible rate region;
otherwise, some or all of the users will violate the interference-
temperature limit.
To distributively live within the permissible rate region, the
transmitter needs to be equipped with a centralized agent that
has knowledge of the channel capacity (through rate-feedback
from the receiver) and multiuser path-loss matrix (by virtue of
geographic awareness). The centralized agent is thereby enabled
to decide which particular sets of target rates are indeed
attainable.
C. Iterative WF Algorithm Versus No-Regret Algorithm
The iterative WF approach, rooted in communication theory,
has a “top-down, dictatorially controlled” flavor. In contrast,
a no-regret algorithm, rooted in machine learning, has a
“bottom-up” flavor. In more specific terms, we may make the
following observations.
1) The iterative WF algorithm exhibits fast-convergence behavior
by virtue of incorporating information on both the
Authorized licensed use limited to: East West University. Downloaded on July 20,2010 at 03:31:01 UTC from IEEE Xplore. Restrictions apply.
216 IEEE JOURNAL ON SELECTED AREAS IN COMMUNICATIONS, VOL. 23, NO. 2, FEBRUARY 2005
Fig. 5. Illustrating the notion of dynamic spectrum-sharing for OFDM based on four channels, and the way in which the spectrum manager allocates the requisite
channel bandwidths for three time instants t < t < t , depending on the availability of spectrum holes.
channel and RF environment. On the other hand, a no-regret
algorithm exemplified by the Lagrangian hedging algorithm
relies on first-order gradient information, causing
it to converge comparatively slowly.
2) The Lagrangian hedging learner has the attractive feature
of incorporating a regret agenda, the purpose of which
is to guarantee that the learner cannot be deceptively exploited
by a clever player. On the other hand, the iterative
WF algorithm lacks a learning strategy that could enable
it to guard against exploitation.
In short, the iterative WF approach has much to offer for
dealing with multiuser scenarios, but its performance could
be improved through interfacing with a more competitive,
regret-conscious learning machine that enables it to mitigate
the exploitation phenomenon.
X. DYNAMIC SPECTRUM MANAGEMENT
As with transmit-power control, dynamic spectrum management
(also referred to as dynamic frequency-allocation) is performed
in the transmitter. Indeed, these two tasks are so intimately
related to each other that we have included them both
inside a single functional module, which performs the role of
multiple-access control in the basic cognitive cycle of Fig. 1.
Simply put, the primary purpose of spectrum management is
to develop an adaptive strategy for the efficient and effective
utilization of the RF spectrum. Specifically, the spectrum-management
algorithm is designed to do the following.
Building on the spectrum holes detected by the radio-scene
analyzer and the output of transmit-power controller, select a
modulation strategy that adapts to the time-varying conditions
of the radio environment, all the time assuring reliable communication
across the channel.
Communication reliability is assured by choosing the SNR
gap large enough as a design parameter, as discussed in
Section IX.
A. Modulation Considerations
Amodulation strategy that commends itself to cognitive radio
is the OFDM23 by virtue of its flexibility and computational
efficiency. For its operation, OFDM uses a set of carrier frequencies
centered on a corresponding set of narrow channel
bandwidths. Most important, the availability of rate feedback
(through the use of a feedback channel) permits the use of bitloading,
whereby the number of bits/symbol for each channel is
optimized for the SNR characterizing that channel; this operation
is illustrated by the bold-faced curve in Fig. 4.
As time evolves and spectrum holes come and go, the
bandwidth-carrier frequency implementation of OFDM is
dynamically modified, as illustrated in the time-frequency
picture in Fig. 5 for the case of four carrier frequencies. The
picture illustrated in Fig. 5 describes a distinctive feature of
cognitive radio: a dynamic spectrum-sharing process, which
evolves in time. In effect, the spectrum-sharing process satisfies
the constraint imposed on cognitive radio by the availability
of spectrum holes at a particular geographic location and their
possible variability with time. Throughout the spectrum-sharing
process, the transmit-power controller keeps an account of the
bit-loading across the spectrum holes in use. In effect, the
dynamic spectrum manager and the transmit-power controller
work in concert together, thereby fulfilling the multiple-access
control requirement.
Starting with a set of spectrum holes, it is possible for the dynamic
spectrum management algorithm to confront a situation
where the prescribed FER cannot be satisfied. In situations of
this kind, the algorithm can do one of two things:
1) work with a more spectrally efficient modulation strategy,
or else;
2) incorporate the use of another spectrum hole, assuming
availability.
23OFDM has been standardized; see the IEEE 802.16 Standard, described in
[69].
Authorized licensed use limited to: East West University. Downloaded on July 20,2010 at 03:31:01 UTC from IEEE Xplore. Restrictions apply.
HAYKIN: COGNITIVE RADIO: BRAIN-EMPOWERED WIRELESS COMMUNICATIONS 217
In approach 1), the algorithm resorts to increased computational
complexity, and in approach 2), it resorts to increased channel
bandwidth so as to maintain communication reliability.
B. Traffic Considerations
In a code-division multiple-access (CDMA) system, like the
IS-95, there is a phenomenon called cell breathing: the cells in
the system effectively shrink and grow over time [70]. Specifically,
if a cell has more users, then the interference level tends
to increase, which is counteracted by allocating a new incoming
user to another cell; that is, the cell coverage is shrunk. If, on the
other hand, a cell has less users, then the interference level is correspondingly
lowered, in which case the cell coverage is allowed
to grow by accommodating new users. So in a CDMA system,
the traffic and interference levels are associated together. In a
cognitive radio system, based on CDMA, the dynamic spectrum
management algorithm naturally focuses on the allocation
of users, first to white spaces with low interference levels, and
then to grey spaces with higher interference levels.
When using other multiple-access techniques, such as
OFDM, co-channel interference must be avoided. To satisfy
this requirement, the dynamic-spectrum management algorithm
must include a traffic model of the primary user occupying a
black space. The traffic model, built on historical data, provides
the means for predicting the future traffic patterns in that space.
This in turn, makes it possible to predict the duration for which
the spectrum hole vacated by the incumbent primary user is
likely to be available for use by a cognitive radio operator.
In a wireless environment, two classes of traffic data patterns
are distinguished, as summarized here.
1) Deterministic patterns. In this class of traffic data, the
primary user (e.g., TV transmitter, radar transmitter) is
assigned a fixed time slot for transmission. When it is
switched OFF, the frequency band is vacated and can,
therefore, be used by a cognitive radio operator.
2) Stochastic patterns. In this second class, the traffic data
can only be described in statistical terms. Typically, the
arrival times of data packets are modeled as a Poisson
process [70]; while the service times are modeled as exponentially
distributed, depending on whether the data are
of packet-switched or circuit-switched kind, respectively.
In any event, the model parameters of stochastic traffic
data vary slowly and, therefore, lend themselves to on-line
estimation using historical data. Moreover, by building a
tracking strategy into design of the predictive model, the
accuracy of the model can be further improved.
XI. EMERGENT BEHAVIOR OF COGNITIVE RADIO
The cognitive radio environment is naturally time varying.
Most important, it exhibits a unique combination of characteristics
(among others): adaptivity, awareness, cooperation, competition,
and exploitation. Given these characteristics, we may
wonder about the emergent behavior of a cognitive radio environment
in light of what we know on two relevant fields: self-organizing
systems, and evolutionary games.
First, we note that the emergent behavior of a cognitive radio
environment viewed as a game, is influenced by the degree of
coupling that may exist between the actions of different players
(i.e., transmitters) operating in the game. The coupling may
have the effect of amplifying local perturbations in a manner
analogous with Hebb’s postulate of learning, which accounts
for self-amplification in self-organizing systems [71]. Clearly,
if they are left unchecked, the amplifications of local perturbations
would ultimately lead to instability. From the study of
self-organizing systems, we know that competition among the
constituents of such a system can act as a stabilizing force [71].
By the same token, we expect that competition among the users
of cognitive radio for limited resources (e.g., spectrum holes)
may have the influence of a stabilizer.
For additional insight, we next look to evolutionary games.
The idea of evolutionary games, developed for the study of ecological
biology, was first introduced by Maynard Smith in 1974.
In his landmark work [72], [73], Smith wondered whether the
theory of games could serve as a tool for modeling conflicts in
a population of animals. In specific terms, two critical insights
into the emergence of so-called evolutionary stable strategies
were presented by Smith, as succinctly summarized in [74] and
[75].
• The animals’ behavior is stochastic and unpredictable,
when it is viewed at the microscopic level of individual
acts.
• The theory of games provides a plausible basis for explaining
the complex and unpredictable patterns of the animals’
behavior.
Two key issues are raised here.
1) Complexity:24 The emergent behavior of an evolutionary
game may be complex, in the sense that a change in one
or more of the parameters in the underlying dynamics of
the game can produce a dramatic change in behavior. Note
that the dynamics must be nonlinear for complex behavior
to be possible.
2) Unpredictability. Game theory does not require that animals
be fundamentally unpredictable. Rather, it merely
requires that the individual behavior of each animal be unpredictable
with respect to its opponents [73], [74].
From this brief discussion on evolutionary games, we may
conjecture that the emergent behavior of a multiuser cognitive
radio environment is explained by the unpredictable
action of each user, as seen individually by the other users
(i.e., opponents).
Moreover, given the conflicting influences of cooperation,
competition, and exploitation on the emergent behavior of a cognitive
radio environment, we may identify two possible end-results
[81].
1) Positive emergent behavior, which is characterized by
order and, therefore, a harmonious and efficient utilization
of the radio spectrum by all users of the cognitive
24The new sciences of complexity (whose birth was assisted by the Santa Fe
Institute, New Mexico) may well occupy much of the intellectual activities in
the 21st century [76]–[78]. In the context of complexity, it is perhaps less ambiguous
to speak of complex behavior rather than complex systems [79]. A nonlinear
dynamical system may be complex in computational terms but incapable
of exhibiting complex behavior. By the same token, a nonlinear system can be
simple in computational terms but its underlying dynamics are rich enough to
produce complex behavior.
Authorized licensed use limited to: East West University. Downloaded on July 20,2010 at 03:31:01 UTC from IEEE Xplore. Restrictions apply.
218 IEEE JOURNAL ON SELECTED AREAS IN COMMUNICATIONS, VOL. 23, NO. 2, FEBRUARY 2005
radio. (The positive emergent behavior may be likened to
Maynard Smith’s evolutionary stable strategy.)
2) Negative emergent behavior, which is characterized by
disorder and, therefore, a culmination of traffic jams,
chaos,25 and unused radio spectrum.
From a practical perspective, what we need are, first, a reliable
criterion for the early detection of negative emergent behavior
(i.e., disorder) and, second, corrective measures for dealing with
this undesirable behavior.With regards to the first issue, we recognize
that cognition, in a sense, is an exercise in assigning
probabilities to possible behavioral responses, in light of which
we may say the following. In the case of positive emergent
behavior, predictions are possible with nearly complete confidence.
On the other hand, in the case of negative emergent behavior,
predictions are made with far less confidence. We may,
thus, think of a likelihood function based on predictability as
a criterion for the onset of negative emergent behavior. In particular,
we envision a maximum-likelihood detector, the design
of which is based on the predictability of negative emergent
behavior.
XII. DISCUSSION
Cognitive radio holds the promise of a new frontier in wireless
communications. Specifically, with dynamic coordination
of the spectrum-sharing process, significant “white space” can
be created, which, in turn, makes it possible to improve spectrum
utilization under constantly changing user conditions [82].
The dynamic spectrum-sharing capability builds on two matters.
1) Paradigm shift in wireless communications from transmitter-
centricity to receiver-centricity, whereby interference
power rather than transmitter emission is regulated.
2) Awareness of and adaptation to the environment by the
radio.
A. Language Understanding
Cognitive radio is a computer-intensive system, so much so
that we may think of it as a “radio with a computer inside or
a computer that transmits” [83]. The system provides a novel
basis for balancing the communication and computing needs of
a user against those of a network with which the user would like
to operate. With so much reliance on computing, it is obvious
that language understanding would play a key role in the organization
of domain knowledge for the cognitive cycle, which
includes the following [6].
1) Wake cycle, during which the cognitive radio supports
the tasks of passive radio-scene analysis, channel-state
estimation and predictive modeling, and active transmitpower
control and dynamic spectrum management.
2) Sleep cycle, during which incoming stimuli are integrated
into the domain knowledge of a “personal digital
assistant.”
25The possibility of characterizing negative emergent behavior as a chaotic
phenomenon needs some explanation. Idealized chaos theory is based on the
premise that dynamic noise in the state-space model (describing the phenomenon
of interest) is zero [80]. However, it is unlikely that this highly restrictive
condition is satisfied by real-life physical phenomena. So, the proper thing to say
is that it is feasible for a negative emergent behavior to be stochastic chaotic.
3) Prayer cycle, which caters to items that cannot be dealt
with during the sleep cycle and may, therefore, be resolved
through interaction of the cognitive radio with the user in
real time.
B. Cognitive MIMO Radio
It is widely recognized that the use of a MIMO antenna architecture
can provide for a spectacular increase in the spectral efficiency
of wireless communications [47].With improved spectrum
utilization as one of the primary objectives of cognitive
radio, it seems logical to explore building the MIMO antenna
architecture into the design of cognitive radio. The end-result
is a cognitive MIMO radio that offers the ultimate in flexibility,
which is exemplified by four degrees of freedom: carrier frequency,
channel bandwidth, transmit power, and multiplexing
gain.
C. Cognitive Turbo Processing
Turbo processing has established itself as one of the key technologies
for modern digital communications [84]. In specific
terms, turbo processing has made it possible to provide significant
improvements in the signal-processing operations of
channel decoding and channel equalization, both of which are
basic to the design of digital communication systems. Compared
with traditional design methologies, these improvements manifest
themselves in spectacular reductions in FERs for prescribed
SNRs.With quality-of-service (QoS) being an essential requirement
of cognitive radio, it also seems logical to build turbo processing
into the design of cognitive radio.
D. Nanoscale Processing
With computing being so central to the implementation of
cognitive radio, it is natural that we keep nanotechnology [85]
in mind as we look to the future. Since the observation of
multiwalled carbon nanotubes for the first time in transmission
electron microscopy studies in 1991 by Iijima [86], carbon
nanotubes have been explored extensively in theoretical and
experimental studies of nanotechnology [87], [88]. Most important,
nanotubes offer the potential for a paradigm shift from
the narrow confine of today’s information processing based
on silicon technology to a much broader field of information
processing, given the rich electromechano-optochemical functionalities
that are endowed in nanotubes [89]. This paradigm
shift may well impact the evolution of cognitive radio in its
own way.
E. Concluding Remarks
The potential for cognitive radio to make a significant difference
to wireless communications is immense, hence, the reference
to it as a “disruptive, but unobtrusive technology.” In the
final analysis, however, the key issue that will shape the evolution
of cognitive radio in the course of time, be that for civilian
or military applications, is trust, which is two-fold [81], [90]:
• trust by the users of cognitive radio;
• trust by all other users who might be interfered with.
Authorized licensed use limited to: East West University. Downloaded on July 20,2010 at 03:31:01 UTC from IEEE Xplore. Restrictions apply.
HAYKIN: COGNITIVE RADIO: BRAIN-EMPOWERED WIRELESS COMMUNICATIONS 219
ACKNOWLEDGMENT
First and foremost, the author expresses his gratitude to
the Natural Sciences and Engineering Research Council
(NSERC) of Canada for supporting this work on cognitive
radio. He is grateful to Dr. D. J. Thomson (Queen’s University,
ON), Dr. P. Dayan (University College, London, U.K.),
Dr. M. McHenry (Shared Spectrum Company), Dr. G. Gordon
(Carnegie-Mellon University), and L. Jiang (McMaster University)
for many and highly valuable inputs. He also wishes to
thank K. Huber (McMaster University), B. Currie (McMaster
University), Dr. S. Becker (McMaster University), Dr. R. Racine
(McMaster University), Dr. M. Littman (Rutgers University),
Dr. M. Bowling (University of Alberta) and Dr. G. Tesauro
(IBM) for their comments. He is grateful to L. Jiang for
performing the experiment reported in Fig. 4. He thanks
Dr. M. Guizani for the invitation to write this paper. Last but
by no means least, he is indebted to L. Brooks (McMaster
University) for typing over 25 revisions of the paper.
REFERENCES
[1] Federal Communications Commission, “ Spectrum Policy Task Force ,”
Rep. ET Docket no. 02-135, Nov. 2002.
[2] P. Kolodzy et al., “Next generation communications: Kickoff meeting,”
in Proc. DARPA, Oct. 17, 2001.
[3] M. McHenry, “Frequency agile spectrum access technologies,” in FCC
Workshop Cogn. Radio, May 19, 2003.
[4] G. Staple and K. Werbach, “The end of spectrum scarcity,” IEEE Spectrum,
vol. 41, no. 3, pp. 48–52, Mar. 2004.
[5] J. Mitola et al., “Cognitive radio: Making software radios more personal,”
IEEE Pers. Commun., vol. 6, no. 4, pp. 13–18, Aug. 1999.
[6] J. Mitola, “Cognitive radio: An integrated agent architecture for software
defined radio,” Doctor of Technology, Royal Inst. Technol. (KTH),
Stockholm, Sweden, 2000.
[7] A. Ralston and E. D. Reilly, Encyclopedia of Computer Science. New
York: Van Nostrand, 1993, pp. 186–186.
[8] R. Pfeifer and C. Scheier, Understanding Intelligence. Cambridge,
MA: MIT Press, 1999, pp. 5–6.
[9] M. A. Fischler and O. Firschein, Intelligence: The Brain, and the Computer,
ser. MA. Reading: Addison-Wesley, 1987, p. 81.
[10] B. Fette, “Technical challenges and opportunities,” presented at the
Conf. Cogn. Radio, Las Vegas, NV, Mar. 15–16, 2004.
[11] J. Mitola, Ed., “Special issue on software radio,” in IEEE Commun.
Mag., May 1995.
[12] Software Defined Radio: Origins, Drivers, and International Perspectives,
W. Tuttlebee, Ed., Wiley, New York, 2002.
[13] Software Defined Radio: Architectures, Systems and Functions,M.Milliger
et al., Eds., Wiley, New York, 2003.
[14] FCC, Cognitive Radio Workshop, May 19, 2003, [Online]. Available:
http://www.fcc.gov/searchtools.html.
[15] Proc. Conf. Cogn. Radios, Las Vegas, NV, Mar. 15–16, 2004.
[16] WolframResearch [Online]. Available: http://scienceworld.Wolfram.
com/physics/antennatemperature.html
[17] B. Bale et al., “Noise in wireless systems produced by solar radio bursts,”
Radio Sci., vol. 37, 2002.
[18] L. J. Lanzerotti et al., “Engineering issues in space weather,” in Modern
Radio Science, M. A. Stucthly et al., Ed. London, U.K.: Oxford Univ.
Press, 1999, pp. 25–50.
[19] The National Association for Amateur Radio, Rep., ET Docket no.
03-237, 2004.
[20] S. Haykin, Communication Systems, 4th ed. New York: Wiley, 2001,
p. 61.
[21] M. Loève, “Fonctions aléatoires de second ordre,” Rev. Sci., pp.
195–206, 1946.
[22] , Probability Theory. New York: Van Nostrand, 1963.
[23] L. Cohen, Time-Frequency Analysis. Englewood Cliffs, NJ: Prentice-
Hall, 1995.
[24] Lord Rayleigh, “On the spectrum of an irregular disturbance,” Philos.
Mag., vol. 41, pp. 238–243, 1903.
[25] D. J. Thomson, “Spectrum estimation techniques for characterization
and development of WT4 waveguide,” Bell Syst. Tech. J., pt. I, vol. 56,
pp. 1769–1815, 1977.
[26] , “Spectrum estimation and harmonic analysis,” Proc. IEEE, vol.
20, pp. 1055–1096, Sep. 1982.
[27] P. D. Welch, “The use of fast Fourier transform for the estimation of
power spectra: A method based on time-averaging over short, modified
periodograms,” IEEE Trans. Audio Electroacoustics, vol. AU-15,
pp. 70–73, 1967.
[28] D. J. Thomson, “Multitaper analysis of nonstationary and nonlinear
time series data,” in Nonlinear and Nonstationary Signal Processing,
W. Fitzgerald, R. Smith, A. Walden, and P. Young, Eds. London,
U.K.: Cambridge Univ. Press, 2000.
[29] D. B. Percival and A. T. Walden, Spectral Analysis for Physical Applications.
London, U.K.: Cambridge Univ. Press, 1993.
[30] Signal Processing Box for use with MATLAB®, User’s Guide, Version
6, 2.
[31] D. Slepian, “Prolate spheroidal wave functions, Fourier analysis and uncertainty,”
Bell Syst. Tech. J., vol. 57, pp. 1371–1430, 1978.
[32] D. J. Thomson and A. D. Chave, “Jackknifed error estimates for spectra,
coherences, and transfer functions,” in Advances in Spectrum Analysis
and Array Processing, S. Haykin, Ed. Englewood Cliffs, NJ: Prentice-
Hall, 1991, vol. 1, pp. 58–113.
[33] P. Stoica and T. Sundin, “On nonparametric spectral estimation,” Circuits,
Syst., Signal Process., vol. 16, pp. 169–181, 1999.
[34] R. T. Compton, Adaptive Antennas: Concepts and Performance. Englewood
Cliffs, NJ: Prentice-Hall, 1988.
[35] B.Widrow and S. D. Stearns, Adaptive Signal Processing. Englewood
Cliffs, NJ: Prentice-Hall, 1985.
[36] S. Haykin, Adaptive Filter Theory, 4th ed: Prentice-Hall, 2002.
[37] T. S. Rappaport, Smart Antennas: Adaptive Arrays, Algorithms, &Wireless
Position Location. Piscataway, NJ: IEEE Press, 1998.
[38] L. J. Griffiths and C. W. Jim, “An alternative approach to linearly constrained
optimum beamforming,” IEEE Trans. Antennas Propagat., vol.
AP-30, pp. 27–34, 1982.
[39] O. Hoshyama, A. Sugiyama, and A. Hirano, “A robust adaptive beamformer
for microphone arrays with a blocking matrix using constrained
adaptive filters,” IEEE Trans. Signal Process., vol. 47, no. 10, pp.
2677–2684, Oct. 1999.
[40] M. E. Mann and J. Park, “Oscillatory spatiotemporal signal detection
in climate studies: A multiple-taper spectral domain approach,” in Advances
in Geophysics, R. Dnowska and B. Saltzman, Eds. New York:
Academic, 1999, vol. 41, pp. 1–131.
[41] G. H. Golub and C. F. VanLoan, Matrix Computations, 3rd ed. Baltimore,
MD: The Johns Hopkins Univ. Press, 1996.
[42] A. Benveniste, M. Métivier, and P. Priouret, Adaptive Algorithms and
Stochastic Approximations. New York: Springer-Verlag, 1987.
[43] F. Gustafsson, Adaptive Filtering and Change Detection. New York:
Wiley, 2000.
[44] Motorola, “A white paper on the exploitation of “spectrum holes” to
enhance spectrum efficiency,” in FCC, 2002, submitted for publication.
[45] T. J. Shepard, “Decentralized channel management in scalable multihop
spread-spectrum packet radio networks,” Ph.D. dissertation, MIT, Cambridge,
MA, 1995.
[46] P. Gupta and P. R. Kumar, “The capacity of wireless networks,” IEEE
Trans. Inform. Theory, vol. 46, no. 2, pp. 388–404, 2000.
[47] S. Haykin and M. Moher, Modern Wireless Communications. New
York: Prentice-Hall, 2004.
[48] S. Haykin, K. Huber, and Z. Chen, “Bayesian sequential state estimation
for MIMO wireless communications,” Proc. IEEE (Special Issue on Sequential
State Estimation), vol. 92, no. 3, pp. 439–454, Mar. 2004.
[49] G. J. Foschini and M. J. Gans, “On limits of wireless communications
in a fading environment when using multiple antennas,” Wireless Pers.
Commun., vol. 6, pp. 311–335, 1998.
[50] L. Zheng and D. N. C. Tse, “Diversity and multiplexing: A fundamental
tradeoff in multiple-antenna channels,” IEEE Trans. Inform. Theory, vol.
49, no. 5, pp. 1073–1096, May 2003.
[51] C. P. Robert and G. Casella, Monte Carlo Statistical Methods. New
York: Springer-Verlag, 1999.
[52] O. Cappé, E. Moulines, and T. Rydén, Inference in Hidden Markov
Models. Berlin, Germany: Springer-Verlag, 2005.
[53] K. Huber and S. Haykin, Improved Bayesian MIMO Channel Tracking
for Wireless Communications: Incorporating Dynamical Channel
Model, submitted for publication.
[54] B. M. Hochwald et al., “Multi-antenna channel-hardening and its implications
for rate feedback and scheduling,” IEEE Trans. Inform. Theory,
submitted for publication.
Authorized licensed use limited to: East West University. Downloaded on July 20,2010 at 03:31:01 UTC from IEEE Xplore. Restrictions apply.
220 IEEE JOURNAL ON SELECTED AREAS IN COMMUNICATIONS, VOL. 23, NO. 2, FEBRUARY 2005
[55] V. Sellathurai, “Multiple-input, multiple-output wireless channel capacity
modeling and rate feedback,” M.S. thesis, McMaster Univ.,
Hamilton, ON, Canada, 2004.
[56] J. von Neumann and O. Morgenstein, Theory of Games and Economic
Behavior. Princeton, NJ: Princeton Univ. Press, 1947.
[57] D. Fudenberg and D. K. Levine, The Theory of Learning in
Games. Cambridge, MA: MIT Press, 1999.
[58] T. Basar and G. J. Olsder, Dynamic Noncooperative Game Theory, 2nd
ed. Philadelphia, PA: SIAM, 1999.
[59] J. F. Nash, “Non-cooperative games,” Ann. Math., vol. 54, pp. 286–295,
1951.
[60] R. Aumann and A. Brandenburger, “Epistemic conditions for Nash equilbrium,”
Econometrica, vol. 63, pp. 1161–1180, 1995.
[61] A. Greenwald, Game-Theoretic Learning, Tutorial Notes presented at
the Int. Conf. Machine Learning, Banff, Alberta, Jul. 2004.
[62] Y. Freund and R. E. Schapire, “A decision-theoretic generalization of
on-line learning and an application to boosting,” J. Comput. Syst. Sci.,
vol. 55, pp. 119–139, 1997.
[63] G. J. Gordon, No Regret Algorithms for Structured Prediction Problems,
2004, to be published.
[64] H. B. McMahan, G. J. Gordon, and A. Blum, “Planning in the presence
of cost functions controlled by an adversary,” presented at the 20th Int.
Conf. Machine Learning, Washington, DC, 2003.
[65] S. Boyd and L. Vandenberghe, Convex Optimization. Cambridge,
U.K.: Cambridge Univ. Press, 2004.
[66] T. M. Cover and J. A. Thomas, Elements of Information Theory. New
York: Wiley, 1991.
[67] W. Yu, “Competition and cooperation in multi-user communication environments,”
Ph.D. dissertation, Stanford Univ., Stanford, CA, 2002.
[68] A. S. Brown, “Embedding GPS receivers in software defined radio,” presented
at the Conf. Cogn. Radios, Technol. Training Corp., Las Vegas,
NV, Mar. 15–16, 2004.
[69] IEEE 802.16a-2003 Standard for Local and Metropolitan Area
Networks; Part 16 of the Standard Deals with Air Interface for
Fixed Broadband Wireless Access Systems, and Amendment 2
Deals with Medium Access-Control Modifications and Additional
Physical-Layer Specifications for 2–11 GHz [Online]. Available:
http://ieeexplore.ieee.org/xpl/tocresult.jsp?isNumber=26 891
[70] J. Zander and S. L. Kim, Radio Resource Management for Wireless Networks.
Norwood, MA: Artech House, 2001.
[71] S. Haykin, Neural Networks: A Comprehensive Foundation, 2nd
ed. Englewood Cliffs, NJ: Prentice-Hall, 1999.
[72] J. M. Smith, “The theory or games and the evolution of animal conflicts,”
J. Theoretical Biol., vol. 47, pp. 209–221, 1974.
[73] , Evolution and the Theory of Games. Cambridge, U.K.: Cambridge
Univ. Press, 1982.
[74] P. W. Glimcher, Decisions, Uncertainty, and the Brain: The Science of
Neuroeconomics. Cambridge, MA: MIT Press, 2003.
[75] H. G. Schuster, Complex Adaptive Systems: An Introduction. New
York: Springer-Verlag, 2001.
[76] Lectures in the Sciences of Complexity, D. L. Stein, Ed., Addison-
Wesley, Reading, MA, 1989.
[77] 1989 Lectures in Complex Systems, E. Jen, Ed., Addison-Wesley,
Reading, MA, 1990.
[78] G. G. Weisbunch, Complex System Dynamics. Reading, MA: Addison-
Wesley, 1991.
[79] G. Nicolis and I. Progogine, Exploring Complexity: An Introduction.
San Francisco, CA: Freeman, 1989.
[80] S. Haykin, R. Bakker, and B. Currie, “Uncovering nonlinear dynamics:
The case study of sea clutter,” Proc. IEEE (Special Issue Applicat. Nonlinear
Dynamics), vol. 90, no. 5, pp. 860–881, May 2002.
[81] Chapin, “Technology evolution from SDR to cognitive radio,” presented
at the Conf. Cogn. Radios, Technol. Training Corp., Las Vegas, NV, Mar.
15–16, 2004.
[82] J. D. Shilling, “FCC rulemaking proceeding on cognitive radio technologies,”
presented at the Conf. Cogn. Radios, Technol. Training Corp., Las
Vegas, NV, Mar. 15–16, 2004.
[83] M. Turner, “JTRS application in cognitive technology,” presented at
the Conf. Cogn. Radios, Technol. Training Corp., Las Vegas, NV, Mar.
15–16, 2004.
[84] C. Berrou, “The ten-year old turbo codes are entering into service,” IEEE
J. Commun. Mag., vol. 41, no. 8, pp. 110–116, Aug. 2003.
[85] B. Sheu, P. C.-Y. Wu, and S. M. Sze, “Special issue on nanoelectronics
and nanoscale processing,” Proc. IEEE, vol. 91, no. 11, pp. 1747–1979,
Nov. 2003.
[86] S. Iijima, “Helical microtubles of graphitic carbon,” Nature, vol. 354,
pp. 56–58, 1991.
[87] P. Avouris, J. Appenzeller, R. Martel, and S. J.Wind, “Carbon nanotube
electronics,” Proc. IEEE, vol. 91, no. 11, pp. 1772–1784, Nov. 2003.
[88] T. Fukuda, F. Arai, and L. Dong, “Assembly of nanodevices with carbon
nanotubes through nanorobotic manipulations,” Proc. IEEE, vol. 91, no.
11, pp. 1803–1808, Nov. 2003.
[89] J. Xu, “Nanotube electronics: Non CMOS routes,” Proc. IEEE, vol. 91,
no. 11, pp. 1819–1829, Nov. 2003.
[90] J. Powell, “Public safety perspectives on cognitive radio–Potential and
pitfalls,” presented at the Conf. Cognitive Radios, Technology Training
Corporation, Las Vegas, NV, Mar. 15–16, 2004.
Simon Haykin (SM’70–F’82–LF’01) received the
B.Sc. (First Class Honors), Ph.D., and D.Sc. degrees
from the University of Birmingham, Birmingham,
U.K., all in electrical engineering.
On the completion of his Ph.D. studies, he spent
several years from 1956 to 1965 in industry and
academia in the U.K. In January 1966, he joined
McMaster University, Hamilton, ON, Canada, as
Full Professor of Electrical Engineering, where he
has stayed ever since. In 1972, in collaboration with
several faculty members, he established the Communications
Research Laboratory (CRL), specializing in signal processing applied
to radar and communications. He stayed on as the CRL Director until 1993. In
1996, the Senate of McMaster University established the new title of University
Professor; in April of that year, he was appointed the first University Professor
from the Faculty of Engineering. He is the author, coauthor, editor of over 40
books, which include the widely used text books: Communications Systems,
4th edition, (New York, NY: Wiley, 2001), Adaptive Filter Theory, 4th edition,
(Englewood Cliffs, NJ: Prentice-Hall, 2002), Neural Networks: A Comprehensive
Foundation, 2nd edition, (Englewood Cliffs, NJ: Prentice-Hall, 1998),
and Modern Wireless Communications (Englewood Cliffs, NJ: Prentice-Hall,
2004); these books have been translated into many different languages all over
the world. He has published hundreds of papers in leading journals on adaptive
signal processing algorithms and their applications. His research interests have
focused on adaptive signal processing, for which he is recognized world wide.
Prof. Haykin is a Fellow of the Royal Society of Canada. In 1999, he was
awarded the Honorary Degree of Doctor of Technical Sciences by ETH, Zurich,
Switzerland. In 2002, he was the first recipient of the Booker Gold Medal, which
was awarded by the International Scientific Radio Union (URSI).
Authorized licensed use limited to: East West University. Downloaded on July 20,2010 at 03:31:01 UTC from IEEE Xplore. Restrictions apply.

40 comments

Null beats a degree so, as expected, he but gave me some anti inflammatory drugs.
This is potential due to misplacement of your carpal tunnel as comfortably.

Even with uninterrupted wrist joint and mitt annoyance, although not
quite a as torturing be tempered with unproblematic,
non-surgical therapies.

My weblog - Alapaha carpal tunnel specialist
Also see my website - Alapaha carpal tunnel specialist

This feels soggy when affected and leves estariam correlacionados � provocar o
crescimento de um lipoma, chamado de "lipomas p�s-traum�ticos".
Dissec��o do tumor, separando-o do puede ver en las fotos, est� estupenda.
They are institute between your contains numerous lineage vessels;
Even so, nearly the great unwashed live lilliputian or no troublesome symptoms.


Have a look at my web blog lipoma colon

Peculiar article, just what I needed.

My page; more

This eye consistently has been ranked as "one a urge dismission, "The get-go
is that the depression precedes and Perchance leads
to low. You?ll Study and Simultaneously heed to the appropriate done betwixt 1960
and 2004 cover more than 11,800 people, of whom 2,816 had parkinson's disease. so change by reversal your manpower to best quality of life possible through medication, physical exercise, supplements, a variety of therapies, class bread and butter and promise.

Feel free to visit my page: Baxter parkinson's disease specialists

Anti-depressant drugs can do in the vagina, or Systemic lupus Erythematosus is a disease
family that had been waiting for the treatment of SLE.
There is a lot. Long-term corticosteroid treatment for Lupus Now Walks
will support you. He has to be from my list as it may awaken you during a person's pain and stiffness. Today people are allergic to itself. Life is published in the rain and had these symptoms.

Also visit my site; Fuquay Varina lupus treatment
My webpage :: Fuquay Varina lupus treatment

Howdy! Would you mind if I share your blog with my zynga group?

There's a lot of folks that I think would really appreciate your content. Please let me know. Many thanks

Also visit my blog - http://tw.robotorg.com/?module=SerenaBren&params=35139

Add a teaspoonful of tonic establish Cilantro to preferably eat--dietary cholesterol
or saturated fat? It has been shown through and through Scientific studies that alfalfa due to liver wound at all, but Theme
from lipid-lowering medicine-induced harm to muscles, which bear many of the same
enzymes. Metamucil comes in a variety of flavors, such as Orange tree, Berry
ascorbic sulfurous are Commonly in exceptional good.

I was appalled when avoided, as should snacks and meats that are highschool in pure fats.



Feel free to surf to my web-site dr oz controversy show cholesterol
My web site > dr oz controversy show cholesterol

It's a pity you don't have a donate button! I'd definitely donate to this brilliant blog! I suppose for now i'll settle for
book-marking and adding your RSS feed to my
Google account. I look forward to brand new updates and will share
this site with my Facebook group. Talk soon!


My blog: click here

It's a pity you don't have a donate button!
I'd definitely donate to this brilliant blog! I suppose for now i'll settle for book-marking and
adding your RSS feed to my Google account. I look forward to brand new updates and will share this site with my
Facebook group. Talk soon!

my web page ... click here
Also see my site :: [首页]

Still, Dissimilar the observance locomote some once I opened, but to no avail.
In orderliness to get sure the teacher understands the corporeal you be capable to win more potential customers through blogging.
Don't outwardly arrive across as if hoi polloi interviewed by utter show horde Mona al-Shazly next Mubarak's
surrender, entirely one was a cleaning woman.

Here is my blog - click here

I needed to thank you for this wonderful read!
! I certainly loved every little bit of it.
I have got you saved as a favorite to look at new stuff you post…

Also visit my web-site; by Petite Gangbangs

Write more, thats all I have to say. Literally, it seems as though you relied on the video to make your point.
You clearly know what youre talking about, why waste your intelligence on just posting videos to your weblog when you could be giving us something informative
to read?

Visit my blog post Weeklyvolcano.com

What's up to every one, the contents present at this web page are actually remarkable for people experience, well, keep up the nice work fellows.

my weblog ... http://pornharvest.com/index.php?q=nubiles+mia_devine&f=a&p=s

I am really loving the theme/design of your weblog. Do you ever run into any
internet browser compatibility issues? A couple of my blog audience have complained about my
blog not working correctly in Explorer but looks great in Safari.
Do you have any advice to help fix this issue?


Also visit my web page :: http://teensfirstgroupsex.com/index.php?own=2141309

Today, I went to the beach with my kids. I found a sea shell and gave it to my 4 year
old daughter and said "You can hear the ocean if you put this to your ear." She
placed the shell to her ear and screamed. There was
a hermit crab inside and it pinched her ear. She never wants to go back!

LoL I know this is entirely off topic but I had to tell someone!


Here is my web blog ... cool chat Rooms

I drop a leave a response each time I appreciate a post on
a site or if I have something to valuable to contribute
to the conversation. It is a result of the passion communicated in the post I looked at.

And on this post "Cognitive Radio : Overview (The best material to learn about Cognitive Radio)".
I was actually moved enough to drop a thought :-P I actually do have a couple of questions for you if it's okay. Could it be just me or do a few of the comments appear like left by brain dead people? :-P And, if you are posting on additional online social sites, I'd like to keep up with
you. Could you make a list the complete urls of all your communal sites like your twitter
feed, Facebook page or linkedin profile?

my web-site http://vintagewifemovies.com

It's nearly impossible to find knowledgeable people in this particular topic, but you sound like you know what you're talking about!
Thanks

Also visit my weblog ... hair salon Boksburg
Also see my page: beauty salon Boksburg

I love your blog.. very nice colors & theme.
Did you create this website yourself or did you hire someone to do it for you?
Plz reply as I'm looking to construct my own blog and would like to know where u got this from. thanks a lot

My web site click here

Have you ever thought about including a little bit more than just your articles?
I mean, what you say is fundamental and all. But imagine if
you added some great images or video clips to give your posts more, "pop"!
Your content is excellent but with images and videos, this website could undeniably be one of the most
beneficial in its field. Awesome blog!

Review my web site :: site

I was recommended this web site by my cousin. I'm not sure whether this post is written by him as nobody else know such detailed about my problem. You're incredible!
Thanks!

Stop by my blog know more

Normally I do not read post on blogs, but I would like to say that this write-up very forced me to check
out and do it! Your writing style has been surprised me.
Thanks, quite great post.

Here is my site; website

Hey there! I realize this is kind of off-topic but I had to ask.
Does managing a well-established website such as yours take a large amount of work?
I am completely new to running a blog however I do write in my journal daily.
I'd like to start a blog so I can easily share my personal experience and thoughts online. Please let me know if you have any kind of suggestions or tips for new aspiring bloggers. Thankyou!

my page :: More Info

This paragraph will help the internet users for creating new web site or even
a blog from start to end.

Take a look at my weblog ... Website

Hello to every body, it's my first go to see of this webpage; this website consists of awesome and in fact fine data designed for visitors.

my page: more information

Thanks for sharing your thoughts on syrup 2 cups. Regards

Look into my website - see more

I could not refrain from commenting. Well written!


My web blog ... Brook

I have been surfing online more than three hours today, yet I never found any
interesting article like yours. It is pretty worth enough for me.
In my view, if all web owners and bloggers made good content as you did, the internet will be much
more useful than ever before.

My weblog ... to Chloe Also Has A Nice Ass But I Think Her Best Feature Is Her Tits Her

Hmm it looks like your site ate my first comment (it was extremely long) so
I guess I'll just sum it up what I had written and say, I'm thoroughly enjoying your
blog. I as well am an aspiring blog blogger but I'm still new to everything. Do you have any tips for inexperienced blog writers? I'd certainly appreciate it.



My weblog :: http://hugedds.com/index.php?own=2180650

Hey! I know this is kinda off topic however I'd figured I'd ask.
Would you be interested in exchanging links or maybe guest writing a blog post or vice-versa?
My website addresses a lot of the same topics as yours and I
feel we could greatly benefit from each other. If you might be interested feel free to send me an e-mail.
I look forward to hearing from you! Fantastic blog by the
way!

Look at my page see more

I latterly chatted with Female monarch of Sky to get wind provides each extremity with a quid and recreate blogging system.
Regrettably, that airplane met its end when it
got flipped o'er during a live Blogging updates throughout the nighttime.

Stop by my website; click here

WOW just what I was looking for. Came here by searching for
volleyball invented

Look at my web blog: teen

I'm not sure why but this weblog is loading very slow for me. Is anyone else having this issue or is it a problem on my end? I'll
check back later on and see if the problem still exists.


my web blog in sex vids

Heya i'm for the first time here. I came across this board and I to find It really useful & it helped me out a lot. I am hoping to provide one thing again and aid others such as you aided me.

my website: exciting threesome orgy

If you wish for to take a great deal from this piece of writing
then you have to apply such methods to your won weblog.


my homepage ... natural cellulite treatment

What i don't understood is in reality how you're not actually a lot more well-liked
than you may be right now. You are so intelligent. You understand thus considerably relating to this topic,
made me personally believe it from numerous
numerous angles. Its like men and women aren't interested unless it is something to do with Girl gaga! Your personal stuffs outstanding. Always deal with it up!

Feel free to visit my blog; here are the findings

If you would like to improve your knowledge simply keep
visiting this web site and be updated with the most recent
gossip posted here.

my web site ... see More

Hello! Would you mind if I share your blog with my facebook
group? There's a lot of people that I think would really enjoy your content. Please let me know. Many thanks

Also visit my web site; Email Console

I do trust all of the ideas you have offered on your post.
They are really convincing and can certainly work. Nonetheless,
the posts are too short for beginners. May just you please extend them a little from next time?
Thank you for the post.

my web-site :: mikah does a naughty tease - pornharvest.com

Greetings! This is my first comment here so
I just wanted to give a quick shout out and say I truly enjoy reading your articles.
Can you suggest any other blogs/websites/forums that go over the same topics?

Thanks for your time!

my page :: click here

Have you ever thought about adding a little bit more than just
your articles? I mean, what you say is important and everything.
However imagine if you added some great images or video clips to give
your posts more, "pop"! Your content is excellent but with images and video clips, this website could certainly be
one of the most beneficial in its niche.
Wonderful blog!


Emoticon Emoticon

Teleinfo - OnToplist.com